Industrial auctions for Over 40 years!

Questions? Contact us Today!
  • Knowledge.
  • Experience.
  • Unparalleled service
  • Koster Industries

Add To Calendar

Auction Location

Place a Proxy Bid

If you are unable to attend an auction, Koster Industries can bid on your behalf

Online Auction


Online Sale Starts Closing At:

Thu, December 6th 2018 1:00 PM EST


7 Carey Place Port Washington, New York (Long Island) 11050


Wednesday, December 5th From 8AM to 4PM

2010 Doosan Puma 240B, 21.6” Swing Over Bed, 15.3” Swing over Saddle, 13.7” Max. Turning Dia., 22.1” Max. Turning Length, 4500 RPM, 2.9” Hole Thru Spindle, 12-Station Turret, 8” 3-Jaw chuck, Collet Nose Spindle, Tool Eye, Parts Catcher, Tail Stock, Parts Conveyor, Hennig Chip Conveyor, Fanuc I Series Controls, LNS Eco-Load-LS2 Magazine Barfeed, S/N PM245527

2008 Doosan Puma 280, 24.8” Swing Over Bed, 19.6” Swing Over Saddle, 16.5” Max. Turning Dia., 25.9” Max. Turning Length, 3.3” Hole Thru Spindle, A2-8 Spindle, 3500 RPM, 10-Station Turret, 18.5KW, Tail Stock, LNS Mdl. 5478827 Chip Conveyor, Tool Eye, Sameca SMW Spacesaver MUZ 12/65 Autoload Bar Feed, Parts Conveyor, Fanuc 21i-TB Control, S/N PM2800908

2004 Daewoo Puma 240B, 21.6” Swing Over Bed, 15.3” Swing Over Saddle, 13.7” Max. Turning Dia., 22.1” Max. Turning Length, 4500 RPM, 2.9” Hole Thru Spindle, 12-Station Turret, Tail Stock, Parts Catcher, Nose Collet Turbo Mdl. 5475-8725 Chip Conveyor, LNS Eco-Load-L Magazine Barfeed, Fanuc 21i-TB, S/n PM240959

2003 YCM Supermax TC-26, 19.6” Swing Over Bed, 13.7” Swing Over Carriage, 25.5” Max. Turning Length, A2-8 Spindle, 3.4” Hole Thru Spindle, 4000 RPM with 10” Chuck, 14.7/20HP, 12-Station Turret, Tail Stock, Tool Pre-Setter, Chip conveyor, Fanuc 18-T, S/N 305140

2012 YCM MV106A, 44”x24” Table, BT-40 Spindle, 30-Position Automatic Tool Changer, Chip Conveyor, Chip Augers, Fanuc MXP-200FB Control, S/N 2171

2008 YCM MV106A, 44” x 24” Table, BT-40 Spindle, 30-Position Automatic Tool Changer, High Pressure Thru Spindle Coolant, Chip conveyor, Fanuc MXP-200i Control, S/N 1415

2002 YCI/Supermax XV-12150A, 53” x 21” Table, 50” X-Travel, 20.4” Y-Travel, 21.2” Z-Travel, BT-40 Spindle, Programmable Coolant, 2200Lbs Work Load Capacity, 30-Position Automatic Tool Changer, 8000RPM????, Fanuc MXP-100i Control, S/N 201013

Matsuura MC-800V, 18” x 46” Table, 30-Position Automatic Tool Changer, #40 Spindle Taper, Yasnac MX2 Control, S/N 86025219

Matsuura 500V-DC Twin Spindle, 15” x 34” Table, BT-35 Taper, Yasnac MX2 Control, Twin 20 Position Automatic Tool Changers, S/N 870406026

Matsuura 500V2, 15” x 34“ Table, 20-Position Automatic Tool Changer, Yasnac M5X Control, S/N 83043150

*Also Available – Haas 8” Rotary Table with Brushless Rotary Controller, Assorted HA5C & SHA5CB Indexers with Brushless Rotary Controllers

2002 YCI Supermax FV56T, 27.5” x 16.5” Table, 660# Max Load Capacity, 22” X-Travel, 16.1” Y-Travel, 17.7” Z-Travel, 45-12000 RPM Spindle???, 16-Position Tool Changer, BT-30 Spindle, Fanuc 18-M, S/N: 102322

1996 Fanuc Robodrill A-T10C, 15.25” x 25.5” Table, 10-Position Turret, Fanuc Series 16M, Type A04B-0069-B, S/N: 969TG727

LATHES & CHUCKS, all types
17” X 60” Graziano “SAG 17” Lathe, Inch / MM Threading, 58-1500 RPM, Camloc Spindle, 10” Chuck, Steadyrest, Draw Bar, S/N: SAG17N11151

12” x 30” Celt 12 Lathe, Inch / MM Threading, 16-Spindle Speeds, 45-2000 RPM, Tapered Spindle, Draw Bar, S/N: N/A

12” x 20” Lathe, Inch / MM Threading, Draw Bar

6” x 13” Eguro PH6L-2A Lathe, Turret Attachment, Tailstock, Draw Bar, 3-Jaw Chuck, S/N: 4061

Hardinge HC, with Mdl. AT Threading Attachment, Vari-Speed, Draw Bar, S/N: HC3184-K

Bridgeport “Series I” 2HP, Vari-Speed, 9” x 42” Power Feed, R8 Spindle, 60-4200 RPM, S/N: 12BR180598

Bridgeport 1-1/2HP, Vari-Speed, 9” x 48” Power Feed, R8 Spindle, 60-4200 RPM, S/N: 12BR-143032

GRINDERS, all types
6” x 18” Boyar Schultz 2A Hydraulic Surface Grinder, 6” x 18” Permanent Magnetic Chuck, Coolant, Direct Drive Spindle, S/N: CH-2479-2A

5” x 10” OmniGrind, with 5” x 10” Tilt-Tru Magnetic Chuck, Pope Direct Drive Spindle, S/N: 794

Darex E-90 Drill Sharpener, S/N: 34P12W371

Darex 1/3HP Pedestal Drill Sharpener, S/N: 57264

SRD NSE-34 1/4HP Drill Sharpener

6” Rockwell Double End Pedestal Carbide Grinder, S/N: 120-1326

2007 10HP Curtis KS10B Rotary Screw Type Air Compressor, 125-PSIG, S/N: BA13213003

10HP Curtis 10E71H1SX-H3D Piston Type Horizontal Tank Mounted Air Compressor, 120-Gal. Tank, S/N: 24X68

Curtis CR50 Air Dryer, S/N: H0050A115071011

Giddings & Lewis “Cordax Discovery” Coordinate Measuring Machine, Pendant Joystick, 25.5” x 22” Table, Flat Screen Monitor, Renishaw MIP Probe, S/N: N/A

12” Mitutoyo Type PJ-300 Bench Type Comparator, 6” x 6” Table, S/N: N/A

Miscellaneous Inspection Items, Including: Imai Sikensi 3R Hardness Tester, Assorted Sunnen Gages, Mitutoyo Height Gages, Digital Height Gages, Pin Gauge Sets, Jo-Blocks, Calipers, Muller Gage, Deltronic Pin Gages, Thread Gages, Blade Mics, Micrometers, Dial Bore Gages, Size Blocks, Verniers, Electric Mics, Ring Gages, V-Blocks, Set-Up Blocks, Assorted Granite Plates – up to 48” x 36” x 6”, Plus Much More!!

9” x 16” Kalamazoo AH9A Automatic Infeed Horizontal Bandsaw, Coolant, S/N: 12.918

Assorted 12” Bench-Type Drill Presses

Excelsior #3R Arbor Press

4” x 6” Delta 31-466-Type 2 Combination Belt / Disc Sander, 1/2HP, 1/60

Sweco FND-LR 22” Vibratory Bowl Finisher, Rubber Lined

1998 Ford Econoline E-350 clubwagon . 5.4 triton v8 , am/fm/cd/hd/Bluetooth , air condiontioning, massive cargo area, 4 speed automatic transmission, 158k miles , vin# 1FBSS31L3WHB14716

Numerous Kurt Vises, Aloris Tool Posts, 500# Vestil MLPH-500-4SFL Lift, Collet Indexers, R8 Collets, 5C Collets, Tape Shooter, Large Quantity of #40 & #35 Taper Tooling, Live Centers, Arbors, Carbide Cutters & Tooling, Lista Cabinets, Chucks, Bench Vises, Tube Sleeves, Themac J45 Tool Post Grinder, Taft Pierce Bench Centers, Grinding Attachments, Drills, Taps, Reamers, V-Blocks, Angle Plates, Tool Cabinets, CNC Tool Carts, Boring Bars, Drill Chucks, Magnifying Bench Lights, Hand Tools, HUNDREDS OF LOTS!!

Not Available
Not Available
Not Available

Want to stay up-to-date with our auctions & current inventory?

Enter your email address below to sign up for our mailing list and never miss an auction again!

Site Design & Development by Logic Web Media