INDUSTRIAL AUCTIONS FOR OVER 40 YEARS!
QUESTIONS? CONTACT US TODAY! 631.454.1766

KNOWLEDGE. EXPERIENCE. UNPARALLELED SERVICE | KOSTER INDUSTRIES

Machine Shop, Tool Room Machinery and Machinery Accessories

Online Auction Sale Date & Time:

Online Sale Starts Closing At:

Wed, September 18th 2019 1:00 P.M. EDT

Location:

136 Newell Avenue, Pawtucket, RI, 02860

Inspection:

Tuesday, September 17th or by Appointment

Auction Description

LATHES
(2) HARDINGE HLV-H SUPER PRECISION TOOL ROOM LATHE 11″ X 18″, 230 VOLTS / 3 PHASE / 60HZ, SWING OVER BED: 11″, SWING OVER CARRIAGE: 9″, SWING OVER CROSS SLIDE: 6″, DIST. BTWN CENTERS: 18″, COMPOUND SLIDE TRAVEL: 3″, CARRIAGE POWER FEED RANGE: 5/16 – 7 IPM, CROSS SLIDE POWER FEED RANGE: 3/16 – 4 IPM, COOLANT SUMP CAPACITY: 3 GAL., HOLE THRU SPINDLE: 1-1/4″, SPINDLE CONFIGURATION: 5C HARDINGE, INFINITELY VARIABLE SPINDLE SPEEDS: 100 – 3,000 RPM, BASE SPEED: 1750 RPM, POWER: 1.5 HP, TORQUE: 15 FT-LB., TAILSTOCK SPINDLE DIAMETER: 1-3/8″, TAILSTOCK SPINDLE TRAVEL: 3-3/4″, [1981-1982]

HARDINGE MODEL HC SUPER PRECISION LATHE WITH THREADING ATTACHMENT, 480 VOLTS, 3 PH, 60 CYCLE, CAPACITY: ROUND 5C COLLETS TO 1-1/16TH, CAPACITY: HEX COLLETS TO 7/8THS, CAPACITY: SQUARE COLLETS TO 3/4″, TURNING CAPACITY – MAXIMUM 6″, SWING OVER BED – MAXIMUM 9″, DISTANCE FROM FACE OF TURRET TO SPINDLE – MAXIMUM 13″, TRAVEL OF CROSS SLIDE 4-1/2″, CROSS SLIDE POWER FEED RANGE 1/4″ – 10″ IPM, SPINDLE SPEED – LOW 125 – 1100 RPM, SPINDLE SPEED – HIGH 1100 – 3000 RPM, INGLE POINT AUTO AIR THREADING ATTACHMENT, 5″ CHUCK W/ 1-1/8″ THROUGH HOLE, HARDINGE 5C COLLET NOSE WITH LEVER COLLET CLOSURE, 8-STATION TURRET, ELECTRIC CARRIAGE AND CROSS SLIDE FEEDS, 8-POSTION STOP DRUM, BUILT-IN COOLANT SYSTEM, S/N: HC-6422-T [1981]

(7) HARDINGE MDL. HSL-59 BENCH MODEL SUPER PRECISION SPEED LATHE, 220V/3PH/60HZ, SPINDLE CAPACITIES: 1-1/16″ WITH ROUND 5C COLLETS, 7/8″ WITH HEXAGON 5C COLLETS, 3/4″ WITH SQUARE 5C COLLETS, 6″ WITH JAW CHUCKS, SPINDLE SPEEDS: 750/1800/3000 RPM, LENGTH OF BED FROM FACE OF SPINDLE: 10″, SPINDLE DRIVE MOTOR: 1/2 HP, LEVER OPERATED CROSS SLIDE, LEVER OPERATED 5C COLLET CLOSER, HARDINGE TAPER SPINDLE CONSTRUCTION, AUTOMATIC SPINDLE BRAKE, HARDENED AND GROUND DOVETAIL BEDWAYS, S/N: HSL-5C-5034T [1983-1985]

(3) HARDINGE MDL. DV-59 SUPER PRECISION TOOLROOM LATHE, 230V/3PH/60HZ, 1HP MOTOR, CAPACITY: 1-1/16″ ROUND 5C COLLETS, SWING OVER BED: 9″, DISTANCE BETWEEN CENTERS: 17″, LENGTH OF BED: 36″, SPINDLE SPEEDS: 230 – 3500 RPM VARIABLE, STEEL CABINET STAND, 5C LEVER DRAW BAR, 5″ 3-JAW CHUCK, COMPOUND X-Y SLIDE, ASSORTED 5C COLLETS, [1978]

(2) HARDINGE SUPER PRECISION MDL. DSM-59 SECONDARY OPERATION TURRET LATHE, 230V/3PH/60HZ, SPINDLE CAPACITY:ROUND 5C COLLETS: 1-1/16″, JAW CHUCK: 5″, HOLE THROUGH SPINDLE: 1-5/32″, LENGTH OF BED: 36″, SWING OVER BED: 9″, TRAVEL OF TURRET SLIDE: 4″, DIAMETER OF TURRET HOLES: 5/8″, SPINDLE SPEEDS: 230 – 3500 RPM, VARIABLE, QUICK PRODUCTION CROSS SLIDE,  HARDINGE TOOL POST RISER BLOCK AND CUTTER HOLDER, 6-POSITION TURRET TAILSTOCK, COOLANT SYSTEM, S/N: DV-59-16237 [1980-1984]

FEELER MDL. FTS-27 SECONDARY OPERATION LATHE, 220V/3PH/60HZ, SPEEDS: 230 – 3500 RPM (VARIABLE), SPINDLE CAPACITY WITH ROUND 5C COLLETS: 1-1/16″, LENGTH OF BED: 36″, SWING OVER BED: 9″, TRAVEL OF TURRET SLIDE: 4″, DIAMETER OF TURRET HOLES: 5/8″, LEVER 5C COLLET CLOSER WITH PNEUMATIC ASSIST, 6-STATION TURRET WITH PNEUMATIC ASSIST

DUNHAM PRECISION LATHE WITH DOVETAIL BED, VOLTAGE: 220V/3PH/60HZ, SWING OVER BED: 9″, BED SIZE: 24″ X 3 3/8″ WIDE DOVETAIL, DISTANCE FLOOR TO BED: 37″, 5C PNEUMATIC COLLET CLOSER, ASSORTED 5C COLLETS, ON-OFF PUSH BUTTON SWITCH, ON-OFF VALVE FOR COLLET CLOSER

DUNHAM MDL. 5C-DL-24-AC PRECISION LATHE WITH DOVETAIL BED, VOLTAGE: 220V/3PH/60HZ, SWING OVER BED: 9″, BED SIZE: 24″ X 3 3/8″ WIDE DOVETAIL, DISTANCE FLOOR TO BED: 37″, 5C COLLET CLOSER – PNEUMATIC TYPE, ASSORTED 5C COLLETS, ON-OFF PUSH BUTTON SWITCH, ON-OFF VALVE FOR COLLET CLOSER, S/N: 1083-75

DUNHAM MDL. 32S-DL 24 AC DL SERIES M PRECISION LATHE WITH PNEUMATIC 3C COLLET CLOSER & CROSS SLIDE, VOLTAGE: 110V/1PH/60HZ, SWING OVER BED: 9″, BED SIZE: 24″ X 3 3/8″ WIDE DOVETAIL, DISTANCE FLOOR TO BED: 37″, ON-OFF PUSH BUTTON SWITCH, ON-OFF VALVE FOR COLLET CLOSER, HARDINGE PRECISION CROSS SLIDE, 3C COLLET CLOSER – PNEUMATIC TYPE, SERIES 100 DC SPEED CONTROL, S/N: 1106-76

T&S (HARDINGE TYPE) HSL SPEED LATHE, 208 /220/440 V – 3PH – 60HZ, 1720 RPM, SWING OVER BED: 9″, LENGTH OF BED FROM FACE OF SPINDLE: 10″

(2) DERBYSHIRE MODEL A PRECISION SPEED LATHE, BENCH MODEL, 115V/1PH/60HZ, SWING OVER BED: 6″, BED LENGTH: 14″, COLLET TYPE: 3C, COLLET MAXIMUM CAPACITY: 1/2″ ROUND, MOTOR: BALDOR 1/3 HP, LEVER OPERATED CROSS SLIDE WITH SPRING RETURN, TAPER TURNING TOOL HOLDER SLIDE, WARNER ELECTRIC CLUTCH BRAKE CONTROL

ELGIN METAL CUTTING BENCH MODEL LATHE 9″ X 17″, 115V/1PH/60HZ, SWING OVER BED: 9″, DISTANCE BETWEEN CENTERS: 17″, SPINDLE SPEEDS: 3, 3-JAW CHUCK, JACOBS 1/2″ DRILL CHUCK FOR TAILSTOCK, SWING DOWN PLEXIGLAS SPINDLE GUARD, STEADY REST, 5C HAND WHEEL DRAW BAR, 10″ FACE PLATE, S/N: F59-2565

EMCO 8.6 LATHE LONG-BED 4.13″ X 23.7″ WITH MAXIMAT #7 4-SPEED MILLING HEAD, 110 VOLT 1-PHASE 60 HZ, DISTANCE BETWEEN CENTERS: 23.7″, CENTER HEIGHT: 4.13″, SWING OVER BED: 8.26, AUTOMATIC LONGITUDINAL FEED, SPEED RANGE: 65-130-265-350-530-700-1400 U/MIN., HEAD-STOCK/ TAIL STOCK OF LATHE 3 MORSE TAPER, V-WAY BEDS, 3-JAW CHUCK WITH INNER AND OUTER JAWS & KEY, FACE PLATE, JACOBS TYPE DRILL BIT CHUCK, MAXIMAT #7 4-SPEED MILLING HEAD W/ 2 MORSE TAPER

WEBB “WHACHEON” MDL. 17C X 40 17” / 25-9/16″ X 40″ *INCH/METRIC* GEARED HEAD ENGINE GAP LATHE, 220-440 V / 3PH / 60HZ, 5HP, SWING OVER BED: 17 1/8″, BED TO CENTER: 8 7/16″, DISTANCE BETWEEN CENTERS: 40″, SWING OVER CROSS SLIDE: 9 3/4″, SWING OVER GAP: 25 9/16″, SPINDLE SPEEDS: (12) 32-1800, SPINDLE NOSE: D1-6, SPINDLE BORE: 2 3/64″, TAPER OF SPINDLE: MT # 6, INCH THREADS: 4 – 80 TPI, METRIC THREADS: 0 5-7 MM PITCH, DP THREADS: 112-8, MODULE THREADS: 0 5-3.5, TAPER OF CENTER: MT # 4, 12” 3-JAW CHUCK THREADED (SMALLEST WORK PIECE IS 4 1/2 ” LARGEST IS 9″), FOOT BRAKE, COOLANT SYSTEM, S/N: 7904 – 29

SOUTH BEND MDL. CL670R 10K, 10″ X 34″ TOOL ROOM LATHE, 220-440V/3PH/60HZ, SWING OVER BED: 10″, SWING OVER SADDLE WINGS: 9-15/16″, SWING OVER CROSS SLIDE: 6-1/4″, HEADSTOCK & TAILSTOCK CENTERS: #2 MT, CROSS SLIDE TRAVEL: 5-7/8″, SPINDLE SPEEDS: 48 – 1435 RPM (12), HOLE THROUGH SPINDLE: 27/32″ (.843″), SPINDLE TYPE: 1-1/2 – 8 THREADED, INCH THREADING: 4 – 224 TPI (48), S/N: 30712KAR [1973]

SOUTH BEND 25″ X 78″ PRECISION METAL CUTTING LATHE, CAT. # CL198, 220V/3PH/60HZ, SWING OVER BED: 25-1/4″, SWING OVER CROSS SLIDE: 18-1/4″, DISTANCE BETWEEN CENTERS: 78″, SPINDLE SPEEDS: 15, 22, 36, 60, 105, 175, 280, 470 RPM, THREADING: 4 TO 224 TPI (48), TAIL STOCK CENTER: #3MT, HEAD STOCK THROUGH SPINDLE HOLE: 1-3/8″, MAXIMUM COLLET CAPACITY: 1-1/16″, SPINDLE TYPE: 2-3/8″ – 6 THREADED, MOTOR: 3 HP, TAPER ATTACHMENT, 3-JAW CHUCK, STEADY REST, DRILL CHUCK WITH ADAPTER, S/N: 5553HKE10 [1955]

SOUTH BEND 9″ X 16″ PRECISION BELT DRIVEN LATHE, 115 V / 1 PH / 60 HZ, SWING OVER BED & SADDLE: 9-1/4″, SWING OVER CROSS SLIDE: 5″, TAILSTOCK / HEADSTOCK CENTERS: #2MT, SPINDLE SPEEDS: 50-1270 RPM (12), HOLE THROUGH SPINDLE: 3/4″, MAX. COLLET CAPACITY: 1/2″, SPINDLE NOSE: 1-1/2″ – 8″, THREADING: 4 TO 224 TPI (48 PITCHES), 1/2HP MOTOR, 3-JAW CHUCK, 8″ FACE PLATE

SEBASTIAN LATHE CO. 13″ X 36″ SHELDON TYPE LATHE, 220V/3PH/60HZ, 1 HP MOTOR, 1725 RPM, SWING OVER BEDWAYS: 13′, DISTANCE BETWEEN CENTERS: 36″, 4-JAW CHUCK, TOOL POST RING/ROCKER, FORWARD/REVERSE ON-OFF SWITCH

CLAUSING MDL. 6918 14″ X 48″ PRECISION LATHE, FLAME HARDENED WAYS, 220V/3PH/60HZ, SWING OVER BED AND SADDLE WINGS: 14-1/8″, SWING OVER CROSS SLIDE: 8-3/8″, HOLE THROUGH SPINDLE: 1-3/8″, DISTANCE BETWEEN CENTERS: 48″, SPINDLE SPEEDS: 45 – 1650 RPM, VARIABLE, THREADING: 4 – 224 TPI (54), SPINDLE NOSE: L-00, SPINDLE CENTER: #3 MT, TAILSTOCK CENTER: #3 MT, MOTOR: 3 HP, 12″, 3-JAW CHUCK, 8″, 4-JAW CHUCK, TRAV-A-DIAL/THREAD DIAL, FLAME HARDENED WAYS, DRUM TYPE REVERSING SWITCH, S/N: 601416

ANTIQUE RARE BROWNELL PROV. RI 11″ X 18″ LATHE, MOTORIZED STEAMPUNK, BENCH MODEL, 115-230V/1PH/60HZ, SWING OVER BED: 11″, DISTANCE BETWEEN CENTERS: 18″, SPEEDS: 3, HOLE THROUGH SPINDLE: 3/4″, BED SIZE: 36-1/2″ (L) X 6″(W), BED HEIGHT: 10-1/2″, CROSS SLIDE TRAVEL: 5-1/4″, CAST IRON CONSTRUCTION – HEAVY DUTY, MOTOR: 1 HP, 1725 RPM, 5″ DIAMETER 3-JAW UNIVERSAL CHUCK, TOGGLE ON-OFF SWITCH, STANDARD TOOLPOST, RING AND ROCKER, LIVE CENTER, COMPOUND SLIDE REST, [1990’S]

MILLING MACHINES
LAGUN MDL. FT1-DRO RAM TYPE VERTICAL TURRET MILLING MACHINE, 220-440V/3PH/60HZ, MOTOR: 2 HP, TABLE WORKING SURFACE: 10″ X 44″, TABLE FEEDS: 30″ X 16″, VERTICAL KNEE TRAVEL: 16″, QUILL TRAVEL: 5″, RAM TRAVEL: 22-3/16″, HEAD TILT, LEFT/RIGHT: 90 DEGREES, HEAD TILT, FRONT/REAR: 45 DEGREES, SPINDLE SPEEDS: 65 – 3000 RPM (8), SPINDLE TAPER: R-8, MAXIMUM COLLET CAPACITY: 3/4″, MAXIMUM WEIGHT CAPACITY ON TABLE: 750 LBS., POWER LONGITUDINAL TABLE FEED, POWER CROSS TABLE FEED, TRAK 2-AXIS DIGITAL READOUT, S/N: SE-21654

HURCO MDL. SM1 3HP VERTICAL MILLING MACHINE, 9″ X 42″ TABLE, V220/3PH/60HZ, TRAVELS: X-24”, Y-15”, Z (QUILL) 5”, RAM TRAVEL 23”, KNEE TRAVEL 16.5”, SPINDLE SPEEDS 60 – 4,000 RPM, SPINDLE MOTOR 3 HP, SPINDLE TAPER R-8, ONE SHOT LUBE, SERVO POWER TABLE FEED, HARDENED WAYS

(7) BRIDGEPORT MDL. BR2J SERIES 1, VARIABLE SPEED, RAM TYPE VERTICAL TURRET MILLING MACHINE, 220V/3PH/60HZ, TABLE SIZE: 9″ X 42″, TABLE TRAVEL: 12″ X 30″(12″ X 26″ POWER FEED), VERTICAL TRAVEL OF KNEE: 16″, SPINDLE SPEEDS: 60 – 4200 RPM, VARIABLE, MOTOR: 2 HP, QUILL TRAVEL: 5″, SPINDLE TAPER: R-8, VERTICAL CAPACITY: 0 – 18-1/2″, THROAT CAPACITY: 6-1/4″ – 18-3/4″, MAXIMUM WORK PIECE WEIGHT: 300 LBS., [1973-1983]

BRIDGEPORT 1 HP, 8-SPEED RAM TYPE J-HEAD VERTICAL TURRET MILLING MACHINE, 220-440V/3PH/60HZ, TABLE SIZE: 9″ X 42″, LONGITUDINAL TABLE TRAVEL: 30″, CROSS TABLE TRAVEL: 9″, VERTICAL TRAVEL OF KNEE: 16″, SPINDLE SPEEDS: 80 – 2720 RPM (8), MOTOR: 1 HP, QUILL TRAVEL: 5″, VERTICAL CAPACITY: 0 – 18-1/2″, THROAT CAPACITY: 6-1/4″ – 18-3/4″, MAXIMUM WORK PIECE WEIGHT: 300 LBS., 2 AXIS DIGITAL READ-OUT, ANILAM MODEL 700, POWER TABLE FEED, S/N: BR27249 [1956]

BRIDGEPORT VERTICAL RAM TYPE MILLING MACHINE, 1-1/2 HP, 220V / 3 PH / 60HZ, TABLE SIZE: 9″ X 42″, LONGITUDINAL TABLE TRAVEL: 30″, CROSS TRAVEL: 12″, VERTICAL TRAVEL OF KNEE: 16″, VERTICAL CAPACITY: 0 – 18″, THROAT SIZE: 6-3/4″ MINIMUM TO 18-3/4″ MAXIMUM, DRILLING CAPACITY: 3/4″ MANUAL/ 3/8″ POWER FEED, QUILL TRAVEL: 5″, SPINDLE SPEEDS: 60 – 4200 RPM (VARIABLE), BRIDGEPORT POWER FEED, DRILL CHUCK, KWIK-SWITCH SPINDLE & 1 TOOL HOLDER

ALLIANT MDL. 1054-3V RAM TYPE VERTICAL KNEE MILLING MACHINE, 54″ TABLE, 230V/2PH/60HZ, TABLE SIZE: 10″ X 54″, LONGITUDINAL TABLE TRAVEL: 37″, CROSS TABLE TRAVEL: 16″, VERTICAL TRAVEL: 16″, SPINDLE TAPER: R8, SPINDLE MOTOR: 3 HP, SPINDLE SPEEDS: 70 – 4200 RPM, VARIABLE, QUILL DIAMETER: 3-3/8″, QUILL TRAVEL: 4-7/8″, THROAT SIZE: 6-1/4″ – 27″, SPINDLE TO TABLE: 3/4″ TO 16-1/4″

BIRMINGHAM MDL. BPS-1054C BELT DRIVE RAM TYPE VERTICAL TURRET MILLING MACHINE, 220-440V/3PH/60HZ, TABLE SIZE: 10″ X 54″, TABLE LOAD CAPACITY: 800 LBS., TABLE T-SLOT SIZE: 5/8″ X 3″, LONGITUDINAL TRAVEL-HAND ONLY: 38″, LONGITUDINAL TRAVEL-WITH POWER FEED: 34-1/4″, CROSS TRAVEL: 18″, VERTICAL TRAVEL: 18″RAM TRAVEL: 18″, QUILL TRAVEL: 5″, SPINDLE TAPER: R-8, HEAD SWIVEL: R 90 DEGREES/L 90 DEGREE, HEAD TILTING , FRONT/BACK: 45 DEG./45 DEG, RAM TURRET SWIVEL: 3650 DEGREES, SPINDLE MOTOR: 3HP/3PH( 2HP/1PH 8-SPEEDS), SPINDLE SPEED TYPE: STEP PULLEY, SPINDLE SPEEDS: 90 – 5600 RPM (16 SPEEDS), 90 – 2800 (8 SPEEDS) 1 PHASE UNITS, 2-AXIS DIGITAL READOUT, ELECTRONIC LONGITUDINAL POWER TABLE FEED

CINCINNATI #2 UNIVERSAL HORIZONTAL MILLING MACHINE, 220V/3PH/60HZ, TABLE SIZE: 51″ X 12″, SPINDLE SPEEDS: 15 – 375 RPM (16), LEVER POSITIONS FOR SPEEDS: 16, OVERARM SIZE: 62″ LONG X 4″ DIAMETER(ROUND), TABLE LONGITUDINAL MOVEMENT: 25″ APPROX., TABLE CROSS FEED MOVEMENT: 11″ APPROX., VERTICAL TABLE MOVEMENT: 12″ APPROX., UNIVERSAL TABLE, OVERARM SUPPORTS, MILLING ARBORS, MILLING SPACERS, CUTTERS, BUILT IN COOLANT SYSTEM, S/N: A1474 D [1974]

(4) BARKER BENCH MODEL HORIZONTAL PRODUCTION MILL, 115V / 1PH / 60HZ, TABLE WORKING SURFACE: 4″ X 12″ W X 1/2″ T SLOTS, TABLE LONGITUDINAL TRAVEL: 5″, HEAD VERTICAL TRAVEL: 3″, SADDLE CROSS TRAVEL: 3″, DIMENSIONS: 50″ X 28″ X 58″ H, WEIGHT: 275 LBS, SPINDLE NOSE: 3C COLLET TAPER, SPINDLE CAPACITY: 1/2″, 1/3 HP MOTOR, LAMP ATTACHMENT, OVERBEAM OUTBOUND SUPPORT, ROLL AROUND BASE

(2) BARKER MDL. PM HORIZONTAL PRODUCTION MILL, 115V / 1PH / 60HZ, TABLE WORKING SURFACE: 4″ X 12″ W X 1/2″ T SLOTS, TABLE LONGITUDINAL TRAVEL: 5″, HEAD VERTICAL TRAVEL: 3″
SADDLE CROSS TRAVEL: 3″, SPINDLE NOSE: 3C COLLET TAPER, SPINDLE CAPACITY: 1/2″

HONES
SUNNEN MDL. MBB-1650 PRECISION HONING MACHINE WITH PF 150 FILTE, 3 PHASE, 220/440 VOLT, I.D. RANGE: 0.060″ TO 6.500″, LENGTH RANGE: HONES BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIAMETER, SPINDLE SPEEDS: 200 TO 1,600 RPM, POWER STROKING RATES (5): 80, 110, 169, 220 & 310 SPM, SPINDLE MOTOR: 1/2 HP, SUNNEN HONING OIL FILTER UNIT – MODEL PF-150 – INCLUDED, FILTER CAPACITY: PAPER, 4550 SQ/IN (29,3 SG/CM), SLUDGE CAPACITY: 75 CIN (1230 CCM), FLOW CAPACITY: 1.5 GAL/MIN @ 25 LBS/IN2 (5,7 L/MIN @ 1,7 BARS), COOLANT CAPACITY: 3.5 GAL. 913,3 L), FLOOR SPACE: 30 W X 15 D X 33 H IN., S/N: 51900

SUNNEN #MBB-1650 PRECISION HONING MACHINE, SINGLE PHASE, 3/4HP MOTOR, MANDREL DIA. (MIN):0.060 ” / 1.5 MM, MANDREL DIA. (MAX):6.500 ” / 165.1 MM, STROKE (MIN):16″ / 406.4 MM, DIA. CAPACITY: FROM .125 TO 3.3875″, MAXIMUM STROKE RANGE: 4″, S/N: 44975 – INCLUDES TOOLING

CYLINDRICAL GRINDERS
H. TSCHUDIN UNIVERSAL MDL. HTG-600 O.D. PRECISION CYLINDRICAL GRINDER, 550V/3PH/60HZ, CENTER HEIGHT: 3.93″, SWING OVER TABLE: 7.86″, DISTANCE BETWEEN CENTERS: 23.62″, GRINDING WHEEL DIMENSIONS: 17.7″ X 1.96″ X 7.99″ BORE, GRINDING WHEEL SPEEDS(3) : 65 – 500 RPM, SPINDLE TAPER: #MT4, TAILSTOCK TAPER: #MT3, TABLE SPEED: UP TO 196 IPM, SPINDLE MOTOR: 5 HP, COOLANT SYSTEM, POWER TABLE TRAVERSE, AUTOMATIC INFEED, PLUNGE INFEED, RAPID WHEELHEAD ADVANCE AND RETRACTION, S/N: 66231

JONES & SHIPMAN MDL. 1300 HYDRAULIC FEED CYLINDRICAL GRINDER, 10″X27″, SWING OVER BED: 10″, DISTANCE BETWEEN CENTERS: 27″, MAX. WORK PIECE WEIGHT BETWEEN CENTERS: 220 LBS., TABLE SWIVEL (FORWARD & BACKWARD): 16- 16 DEGREES, TABLE SPEEDS: 3- 144 IPM WHEELHEAD FEEDS: 0.0001″- 0.0006″, WHEELHEAD SWIVEL: 180 DEGREES, GRINDING WHEEL SPEED (2): 2,100- 2,550 RPM, WORKHEAD SPEEDS (6): 40- 320 RPM, GRINDING WHEEL SIZE: 12″ X 1″ X 5″, NEWALL DPG2000 2-AXIS DIGITAL READOUT, LIVE & DEAD CENTER MOTORIZED WORK HEAD, ID/OD GRINDING HEAD, MOTORIZED WORKHEAD, TAILSTOCK, INTERNAL GRINDING ATTACHMENT, ONE SHOT LUBE SYSTEM, COOLANT SYSTEM, HORSEPOWER: 3, 3 PHASE 50/60 CYCLE

SURFACE GRINDERS
KENT MDL. KGS-250AH 8″ X 18″ HYDRAULIC SURFACE GRINDER, 220-440V/3PH/60HZ, TABLE TRAVEL: 20″, SADDLE TRAVEL: 10″, WORKING CAPACITY: 8″ X 18″, SPINDLE MOTOR: 3 HP, SPINDLE SPEED: 2850 RPM, GRINDING WHEEL: 8″ X 1″ X 1-1/4″, 8″ X 18″ PERMANENT MAGNETIC CHUCK, COOLANT SYSTEM, ARBE DUST COLLECTOR, 1 SHOT LUBRICATION, S/N: 801226 [1980]

CHEVALIER 6″ X 12″ MDL. FSG-612 HAND OPERATED SURFACE GRINDER, 220-440V/3PH/60-HZ, TABLE TRAVEL: 13″ X 6-3/4″, MAXIMUM DISTANCE TABLE TO SPINDLE: 18″, MAXIMUM GRINDING LENGTH: 12″, MAXIMUM GRINDING WIDTH: 6″, SPINDLE AND MOTOR: DIRECT DRIVE 1 HP, GRINDING WHEEL: 8″ X 1/2″ X 1-1/4″ HOLE, 6″ X 12″ FALCON PERMANENT MAGNETIC CHUCK, ONE SHOT LUBRICATION SYSTEM, S/N: 01-01201

CHEVALIER MDL. FSG-2A618 6″ X 18″ HYDRAULIC TABLE SURFACE GRINDER, 220-440V/3PH/60HZ, WORKING SURFACE: 5-3/4″ X 18″, TABLE TRAVEL: 19″ X 6-3/4″
MAXIMUM DISTANCE SPINDLE SURFACE TO TABLE: 18″, TABLE FEEDS: LONGITUDINAL: MANUAL OR 0 – 7- FPM, CROSS FEED INCREMENTAL: MANUAL OR 0.006″ – 0.375″, WHEEL DRESS: MANUAL OR 0.63″ – 3.3 FPM, SPINDLE MOTOR: 1 HP, 3450 RPM, HYDRAULIC PUMP MOTOR:, 2 HP, 3450 RPM, 6″ X 18″ FINE POLE PERMANENT MAGNETIC CHUCK, SEPARATE HYDRAULIC/COOLANT SYSTEM, AUTOMATIC LUBRICATION SYSTEM, SPLASH GUARDS, [1987]

CHEVALIER MDL. FSG-2A618 HYDRAULIC SURFACE GRINDER, 440 V / 3 PH / 60 HZ, TABLE SIZE: 5-3/4″ X 18″, MAX. GRINDING LENGTH: 18″, MAX GRINDING WIDTH: 6″, MAX DISTANCE FROM TABLE SURFACE TO SPINDLE CENTERLINE: 18″, STANDARD MAGNETIC CHUCK SIZE: 5-7/8″ X 17-3/4″, CROSS MOVEMENT OF TABLE: RAPID TRAVEL, APPROX: 38 IPM, AUTOMATIC TRANSVERSE INCREMENT: 0.02-0.24″, GRINDING SPINDLE DRIVE: SPEED: 60HZ / 3450 RPM, 50HZ / 2850 RPM, POWER RATING: 2HP (1.5KW), HYDRAULIC SYSTEM: 1 HP, CROSSFEED DRIVE: 0.05HP, FLOOR SPACE: 75″ X 63″ X 84″, WEIGHT: 1760 LBS, RATED POWER: 3.3 HP, 6″ X 18″ MAGNETIC CHUCK, COOLANT SYSTEM, SPLASH GUARD, LAMP ATTACHMENT, ONE SHOT LUBE SYSTEM, S/N: 2A-2584 [2984]

(4) FREEPORT MDL. SGS-618 6″ X 18″ HAND OPERATED SURFACE GRINDER, 220-440V3PH/60HZ, WORK SURFACE OF TABLE: 5.9″ X 18.3″, MAXIMUM GRINDING SURFACE: 6″ X 18″, MAXIMUM HORIZONTAL TABLE TRAVEL: 18.9″, DISTANCE TABLE TO SPINDLE CENTER: 6.9″, MAXIMUM CROSS TRAVEL OF TABLE: 15.7″, SPINDLE MOTOR: 1 HP, GRINDING WHEEL: 7″ X 1/2″ X 1.25″, SPINDLE SPEED: 3450 RPM, 5″ X 10″ FINE PITCH PERMANENT MAGNETIC CHUCK, ONE SHOT LUBRICATION SYSTEM, [1980-1983]

FREEPORT MDL. SGS-1020AH HYDRAULIC SURFACE GRINDER, 230V/3PH/60HZ, MAXIMUM GRINDING AREA: 10″ X 20″, MAXIMUM TABLE LONGITUDINAL TRAVEL: 22.2″, MAXIMUM CROSS TABLE TRAVEL: 10.4″, SPINDLE TO SURFACE OF TABLE: 19.7″, TABLE SPEED: 200 – 1000 IN./MIN., AUTOMATIC CROSS FEED OF SADDLE: 0″ TO 0.35″, SPINDLE MOTOR: 2 HP, HYDRAULIC PUMP MOTOR: 1 HP, GRINDING WHEEL: 8″ X 1/2″ X 1.25″, SPINDLE SPEED: 3500 RPM, COOLANT MOTOR: 1/8 HP, DUST COLLECTOR MOTOR: 1/2 HP, 8″ X 15″ MAGNETIC CHUCK, DUST COLLECTION SYSTEM, COOLANT SYSTEM, S/N: 810865-17, [1981]

BOYAR SCHULTZ MDL. H618, 6″ X 18″ HAND OPERATED SURFACE GRINDER, 230V/3PH/60HZ, TABLE LONGITUDINAL TRAVEL: 19-7/8″, TABLE CROSS FEED: 6-13/16″, MAXIMUM WORK HEIGHT UNDER WHEEL: 12-1/8″ OVER TABLE, MAXIMUM WORK HEIGHT UNDER WHEEL: 9-1/2″ OVER CHUCK, WORK SURFACE: 5-5/8″ X 18″, SPINDLE MOTOR: 1 HP, 3450 RPM, GRINDING WHEEL: 7″ MAXIMUM X 5/8″ MAXIMUM, 6″ X 18″ WALKER CERAMAX PERMANENT MAGNETIC CHUCK, DUST COLLECTOR IN BASE, ONE SHOT LUBRICATION

BROWN & SHARPE MDL. 510 HAND OPERATED MICROMASTER SURFACE GRINDER, 208V/3PH/60HZ,LONGITUDINAL TABLE TRAVEL: 11″, CROSS TABLE TRAVEL: 5″, HEIGHT UNDER WHEEL: 15-1/2″, WHEEL SIZE: 7″, 5″ X 10″ MAGNETIC CHUCK, LEVER OPERATED TABLE FEED, S/N: 6999-420

BOYAR SCHULTZ MDL. H612″ 6″ X 12″ HAND FEED SURFACE GRINDER, 20V/3PH/60HZ, CAPACITY: 6″ X 12″, HEIGHT UNDER WHEEL: 10″, WHEEL DIAMETER: 6″, OVERALL DIMENSIONS: 42″ X 48″ X 68″ HIGH, 6″ X 12″ WALKER CERAMAX CHUCK, 1 HP DIRECT DRIVE SPINDLE, ONE SHOT LUBRICATION, S/N: 25628

J & S FLUIDMOTION MDL. F-55 WHEEL DRESSER FOR SURFACE GRINDERS, TOOL & CUTTER GRINDERS, CONCAVE RADIUS MINIMUM & MAXIMUM: 1/32″ TO 1-1/2″, CONVEX RADIUS MINIMUM & MAXIMUM: 0 TO 1-1/2″, MAXIMUM WHEEL DIAMETER: 8″, LENGTH OF ANGULAR TRAVEL: 1-3/8″, DIAMOND HEIGHT ABOVE TABLE: 5-1/2″, “G” REMOVABLE MICROMETER BASE: 1-3/16″ TRAVEL

MISCELLANEOUS EQUIPMENT
JOYAL MDL. L1G-5 5KVA BUTT WELDER WITH JOYAL MICRO PROCESSOR WELDING CONTROL, 220 VOLT / 1 PH / 60 HZ, 5 KVA, S/N: 13410-96/17873-1W [1996]

JOYAL MODEL DK 2.2 KVA RESISTANCE SPOT WELDER, 110V/1PH/60HZ, CAPACITY: 2.2 KVA, SOLID STATE TIMER CONTROL

LINDE MDL. UCC-305 WELDER, 208-230-460V/1PH/60HZ, AMPS: 99/94/47, O.C.V.: 78/78, OUTPUT: 300 AMPS, VOLTS: 32/20, DUTY CYCLE: 60%, FOOT PEDAL CONTROL, COOLANT SYSTEM, S/N: C80G-14879

L-TEC MDL. VI-252-CV 250 AMP MIG WELDING SYSTEM, 250V/3PH/60HZ, OUTPUT: 250 AMPS, O.C.V. MAXIMUM: 44, INPUT: 30/15 AMPS, 100% DUTY CYCLE, MILLER #XRW EXTENDED REACH WATER COOLED WIRE FEEDER, S/N: B87G-75202

EFD MDL. BOND BENCH MODEL FUSION WELDER, 110V/1PH/60HZ, WELD CONTROL, WELD ENERGY CONTROL, ANALOG WELDING POWER GAGE 0-100, DIGITAL READOUT, ON-OFF TOGGLE SWITCH, SN: 253443

ORO GOLD MDL. MULTI-MAG 11″ DIAMETER MAGNETIC PARTS FINISHING TUMBLER, 115V/1PH/60HZ, BOWL: LARGE CAPACITY, 11″ DIAMETER, PENTA DC MOTOR DRIVE: 1 HP, TIMER: 0 – 30 MINUTES, ADJUSTABLE INTERVAL TIMER CAN BE SET TO REVERSE AT SET TIME PERIODS

BOWDEN STAINLESS STEEL DEGREASING TANK, 208-220V/3PH/60HZ, MOTOR RPM 1725, HP 1/3, FILL AND DRAIN CONNECTIONS, HEAT CONTROLS, SWITCH FOR TURBO CHARGER, SWITCH FOR HEAT ON/OFF, SWITCH FOR SKIMMER, SWITCH FOR CHIP SEPARATOR​

KERR MINI MELT 30 OUNCE CAPACITY SILVER/GOLD MELTING FURNACE, 120V/1PH/60HZ, AUTOMATIC TYPE, CAPACITY: 30 TROY OUNCES, AMPS: 6.2, WATTS: 750, OPERATING TEMPERATURE: 0-2000 DEGREES F ( 1093 DEGREES C)

RIDGID MDL. 801 AUTOMATIC PIPE THREADING MACHINE, 110V/1PH/60HZ, FOR PIPE AND BOLT THREADING, CAPACITY: 1/8″ – 2″ NPT PIPE, 1/4″ – 2″ BOLTS & RODS NC/NF, RIGHT HAND/LEFT HAND THREADING, 1/2 HP, UNIVERSAL ADJUSTABLE DIES, MOBILE HEAVY DUTY STAND WITH CASTERS, FOOT PEDAL ACTIVATION, REAMER ATTACHMENT, SWING DOWN CUTOFF ATTACHMENT, SELF-CONTAINED THROUGH-THE-HEAD OIL SYSTEM WITH ADJUSTABLE FLOW CONTROL AND INTEGRAL OIL RESERVOIR, 4 PIPE THREADING HEADS, QUICK-OPENING, S/N: 81-02984[1981]

IRWIN DIACRO TYPE HAND OPERATED RADIUS BENDER, #2 SIZE, MAIN PLATE: 15″ DIAMETER, 2″ HIGH RADIUS BLOCKS, 2″ FORMING NOSE, S/N: 908

DUSTVENT MDL. 3-150 CABINET STYLE DUST COLLECTOR, 220V/3PH/60HZ, CAPACITY: 800 – 1000 CFM, INLET SIZE: 8″ DIAMETER, MOTOR: 3 HP, FOOT OPERATED SHAKER BAG SYSTEM

TORIT MDL. 80 3HP CABINET TYPE DUST COLLECTOR, 240/440 VOLT / 3 PHASE / 60 HZ, CAPACITY: 400-580 CFM, EXTERNAL STATIC PRESSURE: 5.50″ TO 4.70″ (W.G.), VELOCITY: 4528 TO 6666 FPM, INLET SIZE: 4″ X 3.5″ X 7-13/16″, MOTOR: 3 HP, FILTER CLOTH AREA: 150 SQ. FT., DUST STORAGE CAPACITY: 2 CU. FT.

TORIT MDL. MC-1000 1000 CFM MIST COLLECTOR, VOLTAGE(V/PH/HZ) 230/460/30/60, AIR VOLUME: 1000 C.F.M., INLET DIAMETER: 8″, 2 STAGE OPERATION, 3HP MOTOR, S/N: N158

DAYTON MDL. 6C503 1 HP PORTABLE MOBILE DUST COLLECTOR, 110V/1PH/60HZ, CAPACITY: 660 CFM MAXIMUM, OPERATING VELOCITY RANGE: 6900 FPM, MOTOR: 1 HP, AMPS: 7, CHIP CAPACITY: 50 MICRONS, DRUM CAPACITY: 36 GALLONS, DBA: 65, CLOTH BAG

 

LARGE QUANTITY OF HARDINGE CROSSLIDES, DRAW BARS, DOUBLE TOOL CROSSLIDES, DUMORE TOOL POST GRINDERS, HAND OPERATED BENCH PRESSES, BELT SANDERS, BRIDGEPORT RIGHT ANGLE ATTACHMENTS, ROTARY TABLES, MACHINE VISES, TAILSTOCKS, INDEXERS, LARGE AMOUNT OF INSPECTION TOOLING INCLUDING DIGITAL HEIGHT GAUGES, INDICATORS, DIGITAL CALIPERS, VERNIER CALIPERS, ANGLE BLOCKS, MICROMETERS, EDGE FINDERS, DEPTH MICS, PIN GAUGE SETS, PARALLES SETS, HAND TOOLS, PERISHABLE TOOLS INCLUDING BORING BARS, DRILLS, TAPS, ETC. COLLETS, PLUS MUCH MORE!