Industrial auctions for Over 40 years!

Questions? Contact us Today!
631.454.1766
  • Knowledge.
  • Experience.
  • Unparalleled service
  • Koster Industries
calendar_icon

Add To Calendar

Auction Location

Place a Proxy Bid

If you are unable to attend an auction, Koster Industries can bid on your behalf

Online Auction

Koster Industries Inc. July 2018 Consignment Auction Sale

Online Sale Starts Closing At:

Wed, July 18th 2018 1:00 P.M. EDT

Location:

Multiple Locations - PA, CT, NY, More to be Added

Inspection:

By Appointment Only

Lot No Description
1 HYUNDAI KIA MODEL KV45 CNC VERTICAL MACHINING CENTERS, TRAVELS: X-31.5”, Y-19.7”, Z-19.7” 45” X 18” SLOTTED TABLE, 30-POSITION AUTOMATIC TOOL CHANGER, 6,000 RPM SPINDLE, THROUGH SPINDLE COOLANT, 15-HP MOTOR, FANUC OI-MC CNC CONTROLS, S/N: 0635 (2007) (LOCATED IN BEDFORD, PA)
2 HYUNDAI KIA MODEL KV45 CNC VERTICAL MACHINING CENTER, TRAVELS: X-31.5”, Y-19.7”, Z-19.7” 45” X 18” SLOTTED TABLE, 30-POSITION AUTOMATIC TOOL CHANGER, 6,000 RPM SPINDLE, THROUGH SPINDLE COOLANT, 15-HP MOTOR, FANUC OI-MC CNC CONTROLS, S/N:  KV450636 (2007) (LOCATED IN BEDFORD, PA)
3 FARO PLATINUM ARM SINGLE POINT COORDINATE MEASURING MACHINE, WITH CASE, WI-FI CAPABILITY, S/N: P08-02-06-04490 (2013) (LOCATED IN BEDFORD, PA)
4 BROWN & SHARPE “MINSTRAL” 7-10-5 COORDINATE MEASURING MACHINE WITH 6-POSITION PROBE CHANGER, 61” X 35” GRANITE SURFACE PLATE, S/N: 0802-9513 (2002) (LOCATED IN BEDFORD, PA)
5 GARDNER DENVER MODEL FPF99K32 30-HP ROTARY SCREW TYPE AIR COMPRESSOR, S/N: S037979 (LOCATED IN BEDFORD, PA)
6 PORTABLE SHOP A-FRAME WITH (3) CM 600 LBS PNEUMATIC HOISTS (LOCATED IN BEDFORD, PA)
7 LVD MODEL HELIUS 2513 2,000-WATT CNC LASER, WITH 52” X 110” CUTTING BED, SHUTTLE TABLE, APPROXIMATELY 50” X 100” CUTTING CAPACITY, GE FANUC SERIES 16-L CNC CONTROLS, S/N: 24994 (1998) (LOCATED IN STAMFORD, CT)
8 MINSTER MODEL PM3-75-24787 75-TON HIGH SPEED PRESS, 42” X 26” BED, 0-800 SPM, 28.62” SHUT HEIGHT, 1.25” STROKE, 2” ADJUSTMENT, VARI-SPEED, WINTRISS CONTROLS, VAMCO TS6 ROLL FEED, S/N: PM3-75-24787 (Located Camden, New Jersey)
9 MINSTER MODEL P2-60-36 60-TON HIGH SPEED PRESS, 1.5” STROKE, 3” ADJUSTMENT, 17.5” SHUT HEIGHT, 36” X 25” BED, VAMCO TS6 ROLL FEED, 0-450 SPM, CONTROL CONSOLE, S/N: P2-6022377 (Located Camden, New Jersey)
10 GASABARRE MODEL VGS 30-TON HIGH SPEED PRESS, WITH 100-1200 SPM, VARI-SPEED, 28” X 36” BED AREA, VARIAX V76 FEEDER, CONTINUOUS / SINGLE STROKE, DUAL PALMS, LUBE SYSTEM, MOTORIZED RAM ADJUSTMENT, CIECO AUTOMATION, ALLEN BRADLEY PANELVIEW PLUS 400 PLC, S/N: 0401 (Located Camden, New Jersey)
11 MINSTER MODEL P2-30-24 “PIECE-MAKER” HIGH SPEED PRESS, WITH 1.25” STROKE, 12.25” SHUT HEIGHT, 24” X 19” BED AREA, 0-600 SPM, S/N: P2-22380 (LOCATED IN CAMDEN, NJ)
12 MINSTER MODEL P2-30-24 “PIECE-MAKER” HIGH SPEED PRESS, WITH 1.25” STROKE, 12.25” SHUT HEIGHT, 24” X 19” BED AREA, 0-600 SPM, S/N: 31860105 (Located Camden New Jersey)
13 4-STAND BENCH TYPE ROLL FORMER (LOCATED IN CAMDEN, NJ)
14 14 GA X 8’ GATTI MODEL S2550 POWER SHEAR, THROAT GAP 7-7/8”, SPEED 50 SPM, COMPLETE WITH FRONT MANUAL BACK GAUGE WITH LINEAR SCALE, (3) FRONT SUPPORT ARMS (LOCATED IN RONKONKOMA, NY)
15 GEKA MODEL HYDRACROP 100SD – DEEP THROAT, 110-TON CAPACITY HYDRAULIC IRON WORKER, 110-TON PUNCHING CAPACITY (1-1/4” ROUND THRU 1” MILD), 24” THROAT DEPTH, 6” X 6” X ½” ANGLE SHEAR CAPACITY, 2” SOLID ROUND / SQUARE SHEAR BLADES, COMPLETE WITH OVERSIZED PUNCH ATTACHMENT (LOCATED IN RONKONKOMA, NY)
16 SUNNEN MODEL MBB-1600 HORIZONTAL HONE, .060” – 6.500” ID RANGE, 16” LENGTH (DEPENDING ON BORE DIAMETER), SPINDLE SPEEDS 200-1,600 RPM, SPINDLE MOTOR: ½”, SELF-ENERGIZING BAND-TYPE SPINDLE BRAKE, S/N: 44467 (LOCATED IN RONKONKOMA, NY)
17 ASSORTED PUNCHES & DIES INCLUDING ROPER WHITENY STYLE LARGE PRESS TOOLING, MISCELLANEOUS ROUNDS, OVALS, RECTANGLES, AND SQUARES, THE MAJORITY ARE IN GOOD SHAPE, SOME ITEMS HAVE BEEN MODIFIED. APPROX. 15-20 SETS PER DRAWER (LOCATED IN RONKONKOMA, NY)
18 LANDA MODEL VHG4-3000 HOT WATER TYPE PRESSURE WASHER, 3.9 GPM, 3,000 PSI, 8.2 HP, BELT DRIVEN PUMP, NATURAL GAS OR LPG FIRED, 220V/3PH/60HZ (LOCATED IN RONKONKOMA, NY)
19 HANKINSON MODEL PR35 REFRIGERATED COMPRESSED AIR DRYER, 35 SCFM @ 100 PSI, 115-V / 1PH (LOCATED IN RONKONKOMA, NY)
20 TYROKE MODEL NC9-B 4TH AXIS ROTARY TABLE (LOCATED IN RONKONKOMA, NY)
21 WUXI YEXIN MACHINERY COMPANY MODEL ST-29M 30’ PLATE BEVELING MACHINE, APPROXIMATE 2-5/8” PLATE THICKNESS, VFD DRIVE, (24) HYDRAULIC HOLDOWNS CONTROL PANEL (2013) (WESTMINSTER, MA)
22 INDUSTRIAL OPEN FACE BOOTH MODEL IB1487, 14” X 7’ DEEP X 8’ HIGH INSIDE DIMENSIONS, 15’ WIDE X 10’ DEEP X 8’6” HIGH OUTSIDE DIMENSIONS, COMPLETE WITH (2) LIGHT FIXTURES, 30” FAN WITH 5-HP 3PH MOTOR, MANOMETER, 120-V SOLENOID VALVE, THERMOTEC 230-V  3-PH UL LISTED CONTROL PANEL, 30” DIAMETER STRAINGT EXHAUST DUCT FOR 13’ ROOF INCLUDES DAMPER CAP AND FLAT ROOF JACK, ROOF MOUNTING HARDWARE. (NEW IN CRATE – NEVER USED)_x00D_
23 BRANER SLITTER HEAD AND BASE ARBOR -FACE WIDTH 36″  -DIAMETER 5″, KNIFE DIAMETER 10 1/2″ – 11″ DRIVE MOTOR 10/15 HP 400/1600 RPM DC, UNIT IS COMPLETE WITH 1 PAIR OF GUIDE ROLLS, 1/2″ FACE EXIT BILLY ROLL, (1) BRANER PAYOFF  WITH COIL CART COIL TIPPER COMBINATION MANDREL SIZE -DIAMETER 16″  – FACE WIDTH 36″, MAX COIL O.D. 72″, UNIT IS COMPLETE WITH HYDRAULICALLY ADJUSTABLE BASE AND MANDREL EXPANSION, WITH A 5 HP 1755 RPM HYDRAULIC POWER PACK AND AIR BRAKE. (1)  SCRAP WINDER, DRIVE MOTOR FOWARD & REVERSE FEED UP DRIVE, RECOILER  BRANER, 16 ID HYD EXPANSION PUSH OFF OVERARM SEPERATOR, 40 HP DRIVE, 2 ARM TURNSTYLE, COMPLETE LINE UNDER POWER – LOCATED IN BROOKLYN, NY
24 14 INCH RUESCH RING SLITTER N 2683  6002 MODEL 149, GAUGE RANGE 005-063, (ALUMINUM/STEEL/BRASS/COPPER/STAINLESS/INCONEL/GOLD), MINIMUM WIDTH 1/4 WIDE, MAXIMUM WIDTH 14 WIDE, UNCOILER I.D. RANGE 16″ TO 20″ MAX O.D 48″ MAX COIL WEIGHT 4000 LBS, RUESCH RING SLITTER HEAD, 3 INCH SHAFTS LOTS OF TOOLING INCLUDES KNIFES SPACERS ROLLER RINGS, RECOILER CAPABILITY: I.D. – MAX O.D., 8 I.D.  24 MAX O.D., 12 I.D.  32 MAX O.D., 16 I.D.  36 MAX O.D., MAX COIL WEIGHT 2000 LBS
25 DOWNLAYER & PACKAGING LINE FOR SLITTING LINE 5000 LB CAPACITY, LOCATED IN BROOKLYN, NY
26 72 X 20000 LB SLITTING LINE SLITS 016-187 THICK MATERIAL AND WIDTHS FROM 3/4 WIDE AND UP UNCOILER BRADBURY 72 WIDE X 20000 LB UNCOILER WITH COIL CAR HYDRAULIC EXPANSION 18-24 AIR BRAKE SLIDING BASE HYDRAULIC HOLD DOWN ROLL FEED UP DRIVE, 75 WIDE ENTRY TABLE HYDRAULIC, 72 UNIVERSAL SLITTER HEAD 7 ARBORS 100 HP VARIABLE SPEED DRIVE, 75 WIDE EXIT TABLE HYDRAULIC, 72 WIDE PROGRESSIVE RECOILER  20000 LB CAPACITY20 ID HYDRAULIC EXPANSION HYDRAULIC PUSH OFF OVERARM SEPERATOR 100 HP DRIVE, 72 WIDE 2 ARM TURNSTYLE 20000 LB CAPACITY EACH ARM UNDER POWER $150000 SLITTING LINE IS UNDER POWER COMPLETE WITH TOOLING (LOCATED IN BROOKLYN, NY)
27 STANAT SLITTING LINE  30″ X 5”, STANAT  SLITTER, 25 HP, PAYOFF, COIL CAR  SCRAP WINDER, RECOILER 1 ARM TURNSTYLE SLITTER HEAD CLOSES TO 12 WIDE FOR HEAVIER GAUGES  MANUFACTURER STANAT 10000 LB CAPACITY, LINE CONSISTS OF THE FOLLOWING; (1) STANAT SLITTER HEAD AND BASE ARBOR -FACE WIDTH 32″, -DIAMETER 5″, KNIFE DIAMETER 10 1/2″ – 11″,  DRIVE MOTOR 25 HP, UNIT IS COMPLETE WITH 1 PAIR OF GUIDE ROLLS, EXIT PINCH ROLLS, (1) STANAT PAYOFF  WITH COIL CART, MANDREL SIZE, -DIAMETER 16″ , -FACE WIDTH 30″ , MAX COIL O.D. 72″, UNIT IS COMPLETE WITH HYDRAULICALLY ADJUSTABLE BASE AND MANDREL EXPANSION, WITH A 5 HP 1755 RPM HYDRAULIC POWER PACK AND AIR BRAKE. (1)  SCRAP WINDER, RECOILER, 16 ID HYD EXPANSION PUSH OFF OVERARM SEPERATOR, 1 ARM TURNSTYLE (LINE IS UNDER POWER) (LOCATED IN BROOKLYN, NY)
28 WYSONG MODEL 630RKB 0.312″ X 6′ HI-SPEED SHEAR, 0.312″ MILD STEEL, 0.210″ STAINLESS STEEL, 72″ WIDE, 60 STROKES PER MINUTE, 20 CUTS PER MINUTE, BOW TIE TOP BLADE, 74″ LONG X 0.875″ THICK, STRAIGHT BOTTOM BLADE, 73″ LONG X 4″ WIDE X 0.875″ THICK, 76″ BETWEEN FRAMES, WICHITA AIR CLUTCH, WICHITA AIR BRAKE, AC DRIVE MOTOR, S/N: P-109-102 (1980) (IN STORAGE IN BROOKLYN, NY – BUYER RESPONSIBLE TO LOAD)
29 AUTOLIFT MODEL D5-300-OC FORKLIFT 30,000 LBS CAPACITY FORKLIFT WITH ROTATING FORKS (BRUDI ROTATOR) 7047 HOURS, DIESEL ENGINE, FRONT TIRES ARE 28 X 16 X 22, BACK TIRES ARE 22 X 10 X 16 MAIN RUBBER INTERNATIONAL, OVERALL DIMENSIONS: 13′ 5″ TALL MAST CAN BE TILTED TO 12′ 8″, 19′ 6″ LONG WITH FORKS 96″ WIDE, BLADES ARE 60″ LONG X 43″ SPREAD, S/N: B-1340 (1989) (LOCATED IN BROOKLYN, NY)
30 SILENT HOIST “RIGGERS SPECIAL” MODEL FLS20 FORKLIFT TRUCK, 40,000 LBS CAPACITY, TOTAL WEIGHT: 62,000 LBS, LIFT:56″ CAN BE MODIFIED TO 61″, FREE LIFT: 43″, MAST HEIGHT: 128″ DOWN 141″ ALL THE WAY UP, STAND UP, PROPANE, CUSHION TURES, NO SIDE SHIFT OR TILT, 60″ FORKS, GREAT FOR LIFTING HEAVY MACHINERY OR STEEL COIL (LOCATED IN BROOKLYN, NY)
32 7 INCH EDGER (LOCATED IN BROOKLYN, NY)
33 18 TORRINGTON SLITTER HEAD 2 5/8 ARBORS (LOCATED IN BROOKLYN, NY)
34 RED BUD 18 INCH STRAIGHTNER 020-125 CAPACITY (LOCATED IN BROOKLYN, NY)
35 24 INCH STANAT SLITTING LINE 3 ARBORS 5000 LB COILS 6 ID 8 ID 12 ID 16 ID 20 ID  (LOCATED IN FLORIDA)
36 GARY MODEL 4910 SP 48 48″ WIDE RECOILER 10,000 LB CAPACITY, WITH 40-HP HYDRAULIC EXPANSION 20 ID DRUM PURSH OFF, S/N: 251 (LOCATED IN BROOKLYN, NY)
37 48 INCH STAMCO UNCOILER 15000 LB CAPACITY 20 -24 ID HYD EXPANSION SLIDING BASE FEED UP MOTOR (LOCATED IN BROOKLYN)
38 72 INCH DRAG BOARD TENSION STAND (LOCATED IN BROOKLYN)
39 COIL UPENDER COIL CART COMBINATION BRANER 48 X 20000 LB CAPACITY (LOCATED IN BROOKLYN, NY)
40 COIL TRANSFER CAR COILTECH 36 WIDE 20000 LB CAPACITY (LOCATED IN BROOKLYN, NY)
41 COIL CAR 30000 LB CAP 32 BED (LOCATED IN BROOKLYN, NY)
42 COIL CAR 20000 LB CAP 36 BED WAS USED ON A 72 WIDE INSPECTION LINE (LOCATED IN BROOKLYN, NY)
43 COIL CAR BRANER 48 X 20000 LB CAPACITY (LOCATED IN BROOKLYN, NY)
44 SCRAP WINDER IOWA PRECISION (LOCATED IN BROOKLYN, NY)
45 SCRAP WINDER GARY (LOCATED IN BROOKLYN, NY)
46 SCRAP WINDER DUAL REELS NEED SOME WORK BEARING BLOCK NEEDS SOME BOLTS /CHAINS/1 HYD MOTOR ALL HYRAULIC (LOCATED IN BROOKLYN, NY)
47 SCRAP WINDER (LOCATED IN BROOKLYN, NY)
48 HAAS VF-2 CNC VERTICAL MACHINING CENTER, WITH 30″ X 16″ X 20″ TRAVELS, 40-TAPER SPINDLE, 3-AXIS, PRE WIRED FOR 4TH AXIS, 20-POSITION AUTOMATIC TOOL CHANGER, 8,100 RPM, HAAS PROGRAMMABLE COOLANT, HAAS CNC CONTROLS, (1994)
49 DAEWOO PUMA MODEL 8-S CNC LATHE, 14.6″ MAXIMUM TURNING, 20.7″ CC, 19.7″ SWING OVER BED, A2-6 SPINDLE NOSE, 12-STATION TURRET, TAILSTOCK, FANUC O-T CNC CONTROLS, S/N: PMS0266 (1995)

 

To accurately post consignment items we ask that you provide the following information
Manufacturer
Model or Type
Serial Number
Year
Machine Capacities Including Table Size, Spindle Size, Bed Size, RPM, Motor HP, Etc.
Controls (If Applicable)
Any Accessories Including Digital Readouts, Attachments, Tooling, Etc.
Can the Item be Inspected?
Is the Item Under Power?
What is the Condition of the Item?
Are There Any Known Issues?
Can you load the item or Buyer Responsibility

Call Us 631.454.1766 or Click Here To Send Email To List Your Items In This Sale



Not Available
Not Available
Not Available

Want to stay up-to-date with our auctions & current inventory?

Enter your email address below to sign up for our mailing list and never miss an auction again!

Site Design & Development by Logic Web Media