Industrial auctions for Over 40 years!

Questions? Contact us Today!
631.454.1766
  • Knowledge.
  • Experience.
  • Unparalleled service
  • Koster Industries
calendar_icon

Add To Calendar

Auction Location

Place a Proxy Bid

If you are unable to attend an auction, Koster Industries can bid on your behalf

Online Auction

Koster Industries Inc. August 2018 Consignment Auction Sale

Online Sale Starts Closing At:

Thu, August 30th 2018 1:00 P.M.

Location:

Multiple Locations

Inspection:

By Appointment Only

REASONS TO LIST YOUR SURPLUS IN THIS SALE


  • No commissions or expenses charged to the seller
  • Promote your sale to tens of thousands of proven auction buyers
  • Seller can establish acceptable reserves
  • A proven method to promote your surplus from one machine to many machines in a major auction event at no cost to you!

Click Submit Listing or Consignment Submission Form to Consign Your Inventory

 

 

Lot Catalog
Lot Description
1  

RUESCH MODEL 146 PRECISION SLITTER, ARBOR WIDTH: 14.000″, MAXIMUM WIDTH OF MATERIAL: 12.000″, DIAMETER OF ARBORS: 4.250″, DIAMETER OF KNIVES: 9.000″ (APPROX), DIAMETER OR SPACER: 6.500″, APPROXIMATE DIMENSIONS: 7′ W X 5′ L X 6′ H, APPROXIMATE WEIGHT: 5,000 LBS, COMPLETE WITH: ENTRY TABLE, SINGLE RECOILER WITH AIR CLUTCH, LARGE ASSORTMENT OF TOOLING, 25-HP MOTOR, NO CONTROLS (LOCATED IN PAWTUCKET, RI)

 

2  

FIOA 10-PASS ROD REDUCTING ROLLING MILL, APPROXIMATE ROLL DIAMETER: 4.000″, APPROXIMATE ROLL WIDTH: 8.000″, APPROXIMATE ROLL JOURNAL: 2.250″, APPROXIMATE ROLL GROOVE: 10 MODIFIED SQUARE 0.400″ – 0.080″, ROLL MATERIAL: 52100, ROLL HARDNESS: 60 – 62 ROCKWELL C, ROLL BEARINGS: PRECISION BRONZE, MILL SCREWDOWNS: ADJUSTABLE INDEPENDENTLY OR SIMULTANEOUSLY, MILL MOTOR: 5-HP, MILL VOLTAGE: 600V (LOCATED IN PAWTUCKET, RI)

 

3  

FENN MODEL 121 2-HI ROLLING MILL, ROLL DIAMETER: 12.500″, ROLL WIDTH: 9.875″, ROLL JOURNAL: 9.00″, EACH COLUMN SECTION: 9.875″ X 11.250″, TOTAL COLUMN AREA: 444, MILL SEPARATING FORCE: APPROXIMATELY 840,000 LBS AT 100-RPM, MILL SCREWDOWNS: HYDRAULIC SCREWDOWNS WITH AUTOMATIC GAUGE CONTROLS. CONTROL CONSOLE WITH ALLEN BRADLEY PANEL VIEW, MILL MOTOR: 125-HP DC (1750-2100 RPM), MILL GEAR REDUCER: 58.01:1 RATIO, APPROXIMATE MILL DIMENSIONS: 154″ L X 78″ W X 122″ HIGH, COMPLETE WITH (2) SPARE SETS OF 12.5″ X 9.875″ ROLLS, (1) 24″ DIAMETER 10,000 LBS RECOILER WITH 25-HP DC MOTOR, (1) 10,000 LBS PAYOFF WITH 10-HP DC MOTOR, (1) HYDRAULIC POWER SUPPLY MILL IS AS-IS. ORIGINAL ROLL SIZE FOR THIS MILL IS 12.500″ DIA X 14.000″ WIDE BUT THE ROLLS WERE MODIFIED FOR THE AUTOMATIC GAUGE CONTROLS (LOCATED IN PAWTUCKET, RI)

 

4  

RUESCH MODEL 177 24″ WIDE X 6-1/2″ DIAMETER ARBORS RING SLITTER, COMPLETE WITH 125-HP RELIANCE DC MOTOR, 480-V, 850-1800 RPM, ARBORS DRIVEN THROUGH COUPLINGS, LINE SPEED: 0-285 RPM @ 12″ KNIFE DIAMETER, STEEL RING ASSEMBLY MODEL N2241, S/N: 5568, HORNBURG / SCOTT PINION STAND, 157-HP MOTOR, SERV. FACTOR 1.0, RATIO: 18:07:01, 850 RPM INPUT, VERTICAL DISTANCE BETWEEN PINION SHAFTS 12″, ELECTRIC CLUTCH, APPROXIMATE DIMENSIONS: HEAD: 8.5′ L X 4′ W X 6.5′ H, DRIVE: 10′ L X 7′ W X 5′ H, APPROXIMATE WEIGHT: HEAD 15,000 LBS, DRIVE: 8,000 LBS, TOOLING COMPLETE WITH (96PCS) 12″ DIA X 0.500 KNIVES, (194PCS) SPACERS OF VARIOUS SIZES (LOCATED IN PAWTUCKET, RI)

 

5  

LVD MODEL HELIUS 2513 2,000-WATT CNC LASER, WITH 52” X 110” CUTTING BED, SHUTTLE TABLE, APPROXIMATELY 50” X 100” CUTTING CAPACITY, GE FANUC SERIES 16-L CNC CONTROLS, S/N: 24994 (1998) (LOCATED IN STAMFORD, CT)

 

6  

14 GA X 8’ GATTI MODEL S2550 POWER SHEAR, THROAT GAP 7-7/8”, SPEED 50 SPM, COMPLETE WITH FRONT MANUAL BACK GAUGE WITH LINEAR SCALE, (3) FRONT SUPPORT ARMS (LOCATED IN RONKONKOMA, NY)

 

7  

GEKA MODEL HYDRACROP 100SD – DEEP THROAT, 110-TON CAPACITY HYDRAULIC IRON WORKER, 110-TON PUNCHING CAPACITY (1-1/4” ROUND THRU 1” MILD), 24” THROAT DEPTH, 6” X 6” X ½” ANGLE SHEAR CAPACITY, 2” SOLID ROUND / SQUARE SHEAR BLADES, COMPLETE WITH OVERSIZED PUNCH ATTACHMENT (LOCATED IN RONKONKOMA, NY)

 

8  

SUNNEN MODEL MBB-1600 HORIZONTAL HONE, .060” – 6.500” ID RANGE, 16” LENGTH (DEPENDING ON BORE DIAMETER), SPINDLE SPEEDS 200-1,600 RPM, SPINDLE MOTOR: ½”, SELF-ENERGIZING BAND-TYPE SPINDLE BRAKE, S/N: 44467 (LOCATED IN RONKONKOMA, NY)

 

9  

ASSORTED PUNCHES & DIES INCLUDING ROPER WHITENY STYLE LARGE PRESS TOOLING, MISCELLANEOUS ROUNDS, OVALS, RECTANGLES, AND SQUARES, THE MAJORITY ARE IN GOOD SHAPE, SOME ITEMS HAVE BEEN MODIFIED. APPROX. 15-20 SETS PER DRAWER (LOCATED IN RONKONKOMA, NY)

 

10  

LANDA MODEL VHG4-3000 HOT WATER TYPE PRESSURE WASHER, 3.9 GPM, 3,000 PSI, 8.2 HP, BELT DRIVEN PUMP, NATURAL GAS OR LPG FIRED, 220V/3PH/60HZ (LOCATED IN RONKONKOMA, NY)

 

11  

HANKINSON MODEL PR35 REFRIGERATED COMPRESSED AIR DRYER, 35 SCFM @ 100 PSI, 115-V / 1PH (LOCATED IN RONKONKOMA, NY)
12 INDUSTRIAL OPEN FACE BOOTH MDL. IB1487, 14″ X 7′ DEEP X 8′ HIGH INSIDE DIMENSIONS, 15′ WIDE X 10′ DEEP X 8’6″ HIGH OUTSIDE DIMENSIONS, COMPLETE WITH (2) LIGHT FIXTURES, 30″ FAN WITH 5-HP 3PH MOTOR, MANOMETER, 120-V SOLENOID VALVE, THERMOTEC 230-V 3-PH UL LISTED CONTROL PANEL, 30″ DIAMETER STRAIGHT EXHAUST DUCT FOR 13′ ROOF INCLUDES DAMPER CAP AND FLAT ROOF JACK, ROOF MOUNTING HARDWARE. (NEW IN CRATE – NEVER USED)

 

12  

INDUSTRIAL OPEN FACE BOOTH MDL. IB1487, 14″ X 7′ DEEP X 8′ HIGH INSIDE DIMENSIONS, 15′ WIDE X 10′ DEEP X 8’6″ HIGH OUTSIDE DIMENSIONS, COMPLETE WITH (2) LIGHT FIXTURES, 30″ FAN WITH 5-HP 3PH MOTOR, MANOMETER, 120-V SOLENOID VALVE, THERMOTEC 230-V 3-PH UL LISTED CONTROL PANEL, 30″ DIAMETER STRAIGHT EXHAUST DUCT FOR 13′ ROOF INCLUDES DAMPER CAP AND FLAT ROOF JACK, ROOF MOUNTING HARDWARE. (NEW IN CRATE – NEVER USED)

 

13  

ARONSON MDL. GE-500EXP, 50,000 LBS. CAPACITY, 84″ SQUARE TABLE, 1,050,000 LBS. TILT TORQUE, 600,000 LBS. ROTATION TORQUE, (4) GEARED ELEVATION POSITIONERS WITH 30″ STROKE, VARIABLE SPEED ON TILT AND ROTATION (0-.6RPM) WITH DIGITAL READ OUT, AEG GETTYS A300 DRIVES, PENDANT CONTROL, MOUNTED ON A SKID WITH AIR LIFT SYSTEM FOR CROSS MOVEMENT, (4) WORM GEARED JACK STANDS, NOTE: NEVER USED FOR WELDING, REMOVED FROM AEROSPACE FACILITY. S/N: 9180

 

14  

BHS TORIN 2HI / 4HI HYDRAULIC AGC REVERSING ROLLING MILL, 2.500″ X 5.500″ X 7.750″, BACKUP ROOL DIAMETER: 5.500″, BACKUP ROLL WIDTH: 7.750″, WORK ROLL DIAMETER: 2.500″, WORK ROLL WIDTH: 7.750″, MILL SCREWDOWNS: HYDRAULIC SCREWDOWNS PREVIOUSLY SETUP FOR AUTOMATIC GAUGE CONTROL, MILL MOTOR: 20-HP DC MOTOR WITH 21.217:1, MILL RECOILERS: 12″ DRUMS WITH 1-HP DC MOTORS, MILL GEARBOX: PINION STAND, MILL COOLING: WATER COOLED ROLL CHOCKS, MILL SLED: ROLL CHANGING SLED. COMPLETE WITH VICKERS MODEL T-80 10-HP HYDRAULIC POWER SUPPLY, 80-GALLON RESERVOIR, 3,000 PSI SYSTEM, THERMAL TRANSFER HEAT EXCHANGER,
NOTE: MILL IS BACKUP ROLL DRIVEN AND SOLD WITH NO UNIVERSAL JOINTS OR ELECTRICAL CONTROLS 15

 

15  

2009 CHEVROLET COLORADO PICKUP TRUCK, CREW CAB, 75,000 MILES

 

16  

MAX SHEET METAL ROLLER (LOCATED IN COPIAGUE, NY)

 

17  

HYSTER H80XM 8500 LBS CAPACITY FORKLIFT TRUCK, 3-STAGE MAST, 169.3″ REACH, SIDE SHIFT, SOLID TIRES, LPG, S/N: KOO5V01999Y

 

18  

FAMCO ARBOR PRESS (LOCATED IN COPIAGUE, NY)

 

19  

ARROW PNEUMATICS REFRIGERATED COMPRESSED AIR DRYER (LOCATED IN COPIAGUE, NY)

 

20  

COMPAIR REFRIGERATED COMPRESSED AIR DRYER (LOCATED IN COPIAGUE, NY)

 

21  

CHIP WRINGER CENTRIFUGE (LOCATED IN COPIAGUE, NY)

 

22  

BARRETT CENTRIFUGALS CENTRIFUGE, S/N: 2360129F (LOCATED IN COPIAGUE, NY)

 

23  

FELLOWS TYPE 72 HIGH-SPEED GEAR SHAPER, S/N: 13338 (LOCATED IN COPIAGUE, NY)

 

24  

GREAVES HORIZONTAL MILLING MACHINE (LOCATED IN COPIAGUE, NY)

 

25  

FALLS PRODUCTS D-BUR-R EDGE DEBURRING MACHINE (LOCATED IN COPIAGUE, NY)

 

26  

CLAUSING MODEL 1676, 16″ FLOOR TYPE VERTICAL DRILL PRESS, S/N: 116033 (LOCATED IN COPIAGUE, NY)

 

27  

HABEGGER MODEL SC-F3E SWISS TYPE LATHE (LOCATED IN COPIAGUE, NY)

 

28  

MSC MODEL 14-40G 14″ X 40″ GAP BED ENGINE LATHE

 

29  

AIRFLOW SYSTEMS EZ-ARM PORTABLE FUME COLLECTOR (LOCATED IN COPIAGUE, NY)

 

30  

EN HAUN MACHINERY TOOLROOM TURRET LATHE (LOCATED IN COPIAGUE, NY)

 

31  

COMPAIR MODEL V22RS ROTARY VANE TYPE AIR COMPRESSOR, 30-HP (LOCATED IN COPIAGUE, NY)

 

32  

STRIPPIT MODEL SONIC 18/30 SINGLE END PUNCH (LOCATED IN COPIAGUE, NY)

 

33  

GEHL 6640 TURBO SKID STEER LOADER, 2-SPEED, WITH PNEUMATIC TIRES, BUCKET (LOCATED IN COPIAGUE, NY)

 

34  

LINDE MODEL UCC-305 300-AMP TIG WELDER, AC/DC, COMPLETE WITH NEW TIG TORCH, UNIT WHEELS WITH COOLANT TANK AT THE BOTTOM, 208/230/460 VOLT SINGLE PHASE, S/N: C84F 43738 (ARGON TANK NOT INCLUDED)

 

35  

LINDE MDL. VI-400, 400-AMP MIG WELDER, COMPLETE WITH ESAB MDL. MIG35 WIRE FEEDER, UNIT ON WHEELS, 240/460 VOLT 3 PHASE (ARGON TANK NOT INCLUDED)

 

36  

BUFFALO FORGE COMPANY 500 HAND CRANK BLACKSMITH FORGE BLOWER (LOCATED IN ISLIP, NY)

 

37  

PORTER CABLE MODEL WG4 WED DRY VERTICAL BELT SANDER GRINDER (LOCATED IN FLANDERS, NY)

 

38  

PORTER CABLE 10″ VERTICAL BELT SANDER (LOCATED IN FLANDERS, NY)

 

39  

PEXTO ACME 30″ JUMP SHEAR (LOCATED IN FLANDERS, NY)

40  

INGERSOLL RAND 25-HP TANK MOUNTED 2-STAGE RECIPROCATING HORIZONTAL AIR COMPRESSOR (LOCATED IN FLANDERS, NY)

41  

MILLER MODEL A-BP AC/DC STICK WELDER WITH LEADS (LOCATED IN FLANDERS, NY)

42  

US GRINDER 12″ DOUBLE END PEDESTAL GRINDER WITH 1-HP MOTOR, S/N: 457350 (LOCATED IN FLANDERS, NY)

43 US GRINDER MODEL 504 TYPE A 13″ DOUBLE END SNAG GRINDER, WITH 3-HP MOTOR, S/N: 591873 (LOCATED IN FLANDERS, NY)

 

44 WESTINGHOUSE MODEL SA200 MIG WELDER WITH WIRE FEED (LOCATED IN FLANDERS, NY)

 

45 GREENHECK MODEL TCB 1-9-4-X AXIEL FAN, 500 FPS, 3/4-HP, 3450 RPM MOTOR, S/N: 06L00991 (LOCATED IN ORANGE, NJ)

 

46 5-HEAD SPOT WELDER (LOCATED IN ORANGE, NJ)

 

47 FLAGLER MODEL L-251C 10-STATION 26 GA. ROLL FORMER, S/N: L2510-463 (LOCATED IN ORANGE, NJ)

 

48 FREDRICH DECKEL MODEL GK21 ENGRAVER, S/N: 4600-5525 (LOCATED IN ORANGE, NJ)

 

49  

MAXIMAT V13 13″ X 40″ GEARED HEAD ENGINE LATHE WITH IN THREADING, SPINDLE SPEEDS 50-2000 RPM, S/N: D1P82301011 (LOCATED INORANGE, NJ)

50  

VAPORPRESS MODEL 30514 GARMENT FINISHING MACHINES, S/N: 1252 (LOCATED IN ORANGE, NJ)

51  

(25) PALLET RACKS CONSISTING OF (21) 12′ LEGS, (4) 5′ LEGS (LOCATED IN ORANGE, NJ)

52  

XEROX MODEL 3030 LARGE FORMAT PRINTER (LOCATED IN ORANGE, NJ)

53  

ACME 2-DOOR STEEL COMBINATION SAFE (LOCATED IN ORANGE, NJ)

54  

2-DOOR STEEL COMBINATION SAFE (LOCATED IN ORANGE, NJ)

55  

2-DOOR STEEL COMBINATION SAFE (LOCATED IN ORANGE, NJ)

56  

2-DOOR STEEL COMBINATION SAFE (LOCATED IN ORANGE, NJ)

57  

2-DOOR STEEL COMBINATION SAFE (1) DOOR REMOVED (LOCATED IN ORANGE, NJ)

Not Available
Not Available
Not Available

Want to stay up-to-date with our auctions & current inventory?

Enter your email address below to sign up for our mailing list and never miss an auction again!

Site Design & Development by Logic Web Media