Industrial auctions for Over 40 years!

Questions? Contact us Today!
631.454.1766| 978.474.4442
  • Knowledge.
  • Experience.
  • Unparalleled service
  • Koster Industries
calendar_icon

Add To Calendar

Auction Location

Place a Proxy Bid

If you are unable to attend an auction, Koster Industries can bid on your behalf

Online Auction

D&J Tool Co, Inc

Online Sale Starts Closing At:

Tue, June 5th 2018 2:00 P.M. EDT

Location:

271 State Route 2016 Nicholson, PA 18446

Inspection:

Monday June 4th from 8:00AM to 4:00PM

VERTICAL MACHINING CENTER
2005 Fadal Mdl. 4020VMC-HT Vertical Machining Center, 40” x 20” x 20” travels, 10,000 RPM, #40 spindle taper, Ridgid Tap, 20” x 48” table, 21 position tool changer, Fadal multi-processor CNC control, S/N: 032005108225
Also Available – Gibbs Cam Software & Dongel


CNC LATHES & CHUCKERS

2008 Clausing “Tornado” Mdl. T4 CNC Chucking Lathe, 5C collet nose, 410mm swing over bed, 230mm max diameter, 200mm – X Travel, 450mm – Z Travel, spindle nose A2-5, 61mm spindle bore, 6000RPM, chip conveyor, 12-position turret, Fanuc 21iTB control, S/N: W4A022

1996 Clausing “Storm” Mdl. 100 CNC Lathe, 2” bar capacity, 4000RPM, 10HP spindle, 12-position turret, parts catcher, turbo system chip conveyor, 5C collet nose, S/N: C10379

1998 Clausing “Storm” Mdl. 110 CNC Lathe, 2” bar capacity, 420mm swing over ways, 280mm swing over carriage, 186mm maximum turning diameter, 180mm X-travel, 410mm Z-travel, A2-5 spindle nose, 61mm spindle bore, tailstock, 12-position turret, 15HP motor, parts catcher, tailstock, Fanuc 21iT controls, S/N: T10117

Ikegai Mdl. FX20N CNC Chucker, 6-position turret, 2” bar, Fanuc 6T control, S/N: 23435T


LATHES INCLUDING 2ND OPERATION

Hardinge DV/DSM-59 Turret Lathe, 5C collet capacity, 9” swing over bed, draw bar, 6-position turret, vari-speed, production cross slide, vertical cut-off, S/N: DV-59-17222 [1981]


VERTICAL MANUAL & CNC KNEE MILLS

Bridgeport “Series II” Interact Variable Speed CNC Vertical Mill, 15” x 38” table, 2HP vari-speed drive, M-function, Heidenhain TNC-145 control, S/N: 505060385

Bridgeport 1HP Vertical Mill, 9” x 36” table, Servo power feed, 8-spindle speeds, 80-2720 RPM, Trak 102 digital readout, S/N: 12-103849


VERTICAL MACHINING CENTER
2005 Fadal Mdl. 4020VMC-HT Vertical Machining Center, 40” x 20” x 20” travels, 10,000 RPM, #40 spindle taper, Ridgid Tap, 20” x 48” table, 21 position tool changer, Fadal multi-processor CNC control, S/N: 032005108225

Also Available – Gibbs Cam Software & Dongel


CNC LATHES & CHUCKERS
2008 Clausing “Tornado” Mdl. T4 CNC Chucking Lathe, 5C collet nose, 410mm swing over bed, 230mm max diameter, 200mm – X Travel, 450mm – Z Travel, spindle nose A2-5, 61mm spindle bore, 6000RPM, chip conveyor, 12-position turret, Fanuc 21iTB control, S/N: W4A022

1996 Clausing “Storm” Mdl. 100 CNC Lathe, 2” bar capacity, 4000RPM, 10HP spindle, 12-position turret, parts catcher, turbo system chip conveyor, 5C collet nose, S/N: C10379

1998 Clausing “Storm” Mdl. 110 CNC Lathe, 2” bar capacity, 420mm swing over ways, 280mm swing over carriage, 186mm maximum turning diameter, 180mm X-travel, 410mm Z-travel, A2-5 spindle nose, 61mm spindle bore, tailstock, 12-position turret, 15HP motor, parts catcher, tailstock, Fanuc 21iT controls, S/N: T10117

Ikegai Mdl. FX20N CNC Chucker, 6-position turret, 2” bar, Fanuc 6T control, S/N: 23435T

 

LATHES INCLUDING 2ND OPERATION
Hardinge DV/DSM-59 Turret Lathe, 5C collet capacity, 9” swing over bed, draw bar, 6-position turret, vari-speed, production cross slide, vertical cut-off, S/N: DV-59-17222 [1981]

 

VERTICAL MANUAL & CNC KNEE MILLS
Bridgeport “Series II” Interact Variable Speed CNC Vertical Mill, 15” x 38” table, 2HP vari-speed drive,  M-function, Heidenhain TNC-145 control, S/N: 505060385

Bridgeport 1HP Vertical Mill, 9” x 36” table, Servo power feed, 8-spindle speeds, 80-2720 RPM, Trak 102 digital readout, S/N: 12-103849

 

GRINDERS – ALL TYPES, & BUFFER
2007 6” X 18” Sharp Mdl. SG68-3A 3-Axis Automatic Surface Grinder, 6” x 18” Jin Jung electromagnetic chuck, 1.5HP spindle motor, 1.5HP motor, over the wheel dresser, coolant, 1-axis NC system ST-1, S/N: 96BT447

Baldor Mdl. 333B 3/4HP Double End Buffer, single phase, 115/230 volts

Lisle 1/3HP Drill Grinder, bench type

Baldor #500 Carbide Grinder, 1/2HP, Single Phase, S/N: P381

Rockwell 1/2HP Double End Pedestal Grinder

1/4HP Bench Grinder

6” x 12” Harig “Super 612 Hand Feed Grinder, 6” x 12” Ceramax permanently magnetic chuck, 1HP direct drive spindle, S/N: 8331

Assorted Transformers/Phase Converters

 

HONE
Sunnen Mdl. MBC-1800 Hone, power stroke, 1HP, .125-3.75” range

*Also Available: Quantity of Mandrels, Stones, Tooling, Etc.

 

Bandsaw
Clausing/Startrite Mdl. HB28OA Automatic Feed Horizontal Bandsaw, 2HP Vari-speed, infeed table, counter with auto-stop, 10” round, 7” x 16” rectangular, S/N: 152977

16” Jet Mdl. VBS-400 Vertical Bandsaw, 2HP, 22” x 23.5” table, blade welder, 15-420 FPM, S/N: 402433 [1980]

 

MISCELLANEOUS MACHINERY
2006 Ingersoll Rand 5HP Vertical Tank Mounted Air Compressor, 80 Gallon, 125PSIG, S/N: 509775 with Ingersoll Rand Mdl. DS15 air dryer unit, S/N: 2982790003

30-Ton Impala Mdl. CP-100 H-Frame Hydraulic Shop Press, manual, adjustable lower rail, 23-1/2” between uprights

Torit Dust Collector

1” Single Phase Vertical Belt Sander, bench-type

6” Rockwell Mdl. 31-556 Vertical Belt Sander, S/N: 16250

 

INSPECTION
14” Scherr-Tumico Optical Comparator, Telecentric, 6” x 16” table, S/N: 4947

Also Including: Pin gauge sets, Jo-blocks, angle blocks, Mitutoyo micrometers, calipers, gauges, etc.

 

MISCELLANEOUS SHOP SUPPORT – Including Kurt vises, angle plates, keyway cutters, #1 arbor press, right angle milling head, carbide bits, tapping heads, #40 taper tooling, stamp sets, inserts for threading, soft jaws, cabinets, face plates, parts washer, Themac J-35 tool post grinder, radius dresser, bar pullers, drills, taps, reamers, work benches, drill boxes, indexing heads, hand tools, chopsaw, etc.
Assorted raw material including stainless steel bar stock, aluminum, bronze, etc.

Not Available
Not Available
Not Available

Want to stay up-to-date with our auctions & current inventory?

Enter your email address below to sign up for our mailing list and never miss an auction again!

Site Design & Development by Logic Web Media