If you are unable to attend an auction, Koster Industries can bid on your behalf
Tue, May 9th 2017 10:30 A.M.
905 Brush Avenue, Bronx, NY, 11231
Monday May 8, 2017 from 8:00 A.M. to 4:00 P.M. and morning of auction
Line 7 tooled for: Tooled for cabinet/door track industry
Line 8 – 12 Stand Yoder M1.5 Roll Forming Line, Consisting Of: 4000 Lbs Littel mandrel uncoiler, Lee Shaffer shear/end welder with Econo-Twin HF Welder,12 stand Yoder M1.5 roll former, 1.5” Arbors, 25 HP, 12” roll space, currently set-up for 8”, 5”-7” VC, 11” HC, 32 Ton Minster #3 Cutoff Press 2” stroke air clutch, S/N 3-5241, R-L line direction
Line 8 tooled for: Tooled for standard roll form u-channel
Line 9 – 12 Stand Yoder M1.5 Roll Forming Line, Consisting Of: Elevated 2500 Lbs Littell mandrel uncoiler, S/N 54736, with looping system, 56 ton Minster #70-4 pre-punch press 1.5” stroke, air clutch, 3” Adj, S/N 70-4-6530, 12 stand Yoder M1.5 roll former, 1.5” Arbors, 25 HP, 10” roll space, 5”-7” VC, 11” HC, 22 Ton Minster #3 Cutoff Press 2” stroke air clutch, R-L line direction
Line 9 tooled for: Continuous 1 5/8” x 1 5/8” & 1 5/8” x 3” slotted angle
Line 10 – 12 Stand Yoder M1.5 Roll Forming Line, Consisting Of: 4000 Lbs Littell Mdl 40-18 mandrel uncoiler, S/N S-6225-69, 12 stand Yoder M1.5 roll former, 1.5” Arbors, 20 HP estimated, 10” roll space, 5”-7” VC, 11” HC, 25 Ton Rousselle #3 Cutoff Press 2” stroke air clutch, R-L line direction
Line 10 tooled for: Can form generic roll formed products
Line 11 – 9 Stand Ardcor Roll Forming Line, Consisting Of: 9 stand Ardcor roll former, 1 3/4″” Arbors, 25 HP, 14” roll space, currently set-up for 6” roll space, 5”-7” VC, 14” HC, 22 Ton Niagara A2-1/2 Flywheel Press, 2” Stroke, 2” Adj., S/N 37224, R-L line direction
Line 7 tooled for: Can form generic roll formed products
5-Stand Cantilever-Type Roll Former, 1.5” Arbors, Apprx 2” Vertical Adjustment,6” Long Arbors
PRESSES (all types)
110 Ton Niagara OBI Back Geared Punch Press, mechanical, with tie rods, S/N: 23404
100 Ton Turner Back Geared Non-Inclinable Punch Press, with Air Clutch, 3” stroke, 17” shut height, 3” adjustment, S/N: 1262/5H
90 Ton Niagara Mdl. A-5-1/2 Back Geared Press, Dual Palms, 27” x 41” Bed
88 Ton Minster #8 OBI Back Geared Punch Press, with Air Clutch, 6” stroke, 3-1/2” adjustment, 20” x 40 Bed, (Cracked Leg), S/N: 8-54559
75 Ton Clearing #75 Back Geared OBI Punch Press, with 5” stroke, 40 SPM, 18” shut height, 22” x 33” Bed, S/N: 53-19836-P
60 Ton Niagara Mdl. A4 OBI Flywheel Type Punch Press, with air clutch, 2” stroke, 14-3/4” shut height, 3” adjustment, Slide Feed, S/N: 37659
60 Ton Rousselle Mdl. 6SS72 Single Crank Straight Side Press, with air clutch, 30” x72” bed, 14” x 70” Top Ram, Air Counter Balance, S/N: FNSA-9133
60 Ton Bliss Mdl. C-60 OBI Flywheel Type Punch Press, with Air Clutch, 4” stroke, 14-1/4” shut height, Littell 3” roll feed, Dual Palm, S/N: H61163,HP46825 (1968)
56 Ton Minster #6 OBI Back Geared Punch Press, with 5” stroke, 3” adjustment, Mechanical Clutch, S/N: 6-6052
56 Ton Minster #6 OBI Back Geared Punch Press, with Air Clutch, 3” adjustment, Coilmatic Mdl. MD2DL-1818 Slide Feed, S/N: 6-2887
45 Ton Bliss Mdl. C-45 OBI Flywheel Type Punch Press, 3” Stroke, Mechanical, S/N: H51110,HP38351
45 Ton Bliss Mdl. C-45 OBI Flywheel Type Punch Press, mechanical, with 4” stroke, S/N: H5104,HP38157 (1961)
45 Ton L&J #5S OBI Flywheel Type Punch Press, with air clutch, S/N: N/A
30 ton Press-Rite OBI Flywheel Mechanical Press
25 Ton Roussell Mdl. 25H Horn Press, Mechanical, 4” Dia. Horn, Air Feed, Manual Elevating Table, S/n 114
20 Ton Walsh OBI Flywheel Mechanical Press, S/N 8982
15 Ton Rousselle Mdl. 2E OBI Flywheel Type Punch Press, mechanical
15 Ton F.J. Edwards Back Wheel Mechanical Press
(5) 2500# Littell Mdl 25-18, 15”/18” ID x 18”Wide, S/N’s 4588-51, 69458-61, S-4839-66, 69836-62, 6936-69
4000# Littell Mdl. 40-18 Uncoiler, 15” ID, 60” OD, S/N S-9954-72
Littell #90 Uncoiler
C-FRAME HYDRAULIC PRESS
16 Ton Hannifin Mdl. 16TONF-160-AO.G C-Frame Hydraulic Press, 10” Throat, single lever, 20” x 26” Table, S/N: C-65891
Hobart “Beta-Mig 200” Welder
300-Amp Miller “Millermatic 300” Welder
500-Amp P&H Mdl. 500-HFSG AC/DC Arc Welder
14ga. X 72” Wysong Mdl. 1472 Hydraulic Power Shear, (NO BACKGAUGE) S/N: SP1-101
16” NorthHill Power Gap Shear
100-KVA Standard Pneumatic Press Type Spot Welder, with 12” throat, 208 volts, Weltronic / Technitron T2080-TI Solid State Controls, Foot Switch, S/N: 2972
45 Ton x 78” Verson #2062 Mechanical Press Brake, with motorized ram adjustment, 18” x 78” bottom t-slotted bed (whistler type), Flanged Bed & Ram, 12” shut height, 2-1/2” stroke, S/N: 16388-2062-45
6’ Whitney Jensen Hand Brake
111 Ton Buffalo #2-1/2 Mechanical Ironworker, with 10” x ¾” shear, 1-5/16” thru 1” MS, 24” throat, 2-1/4” rounds, 6” x 6” x ½” angle, S/N: 57U694
21” x 60” Okuma Mdl. L-S Lathe, with 35-1800 RPM spindle speed, inch / mm threading, Steady Rest, Taper Attachment, 3-Jaw Chuck, S/N: 4402-14107
21” x 60” Hercules Gap Bed Lathe, with inch / mm threading, Apprx 28” Thru Gap, 52 – 1400 RPM, Steady Rest, S/N: N/A
10” x 24” Logan Mdl. 850 Lathe, with 3-jaw Chuck, S/N 18817
Warner & Swasey #1A Saddle Type Turret Lathe, with 3-jaw chuck, M-470, Lot 89, S/N 539349
VERTICAL MILLING MACHINES
 Bridgeport 1HP J-Head Vertical Mills, with 8-spindle speeds, 80-2720 RPM, 9” x 42” power feed table, S/N’s: 12BR 111129; 12BR 59522
Bridgeport 1HP J-Head Vertical Mill, with 8-spindle speeds, 80-2720 RPM, 9” x 32” hand feed table, S/N: 92427
Bridgeprot 1 HP Vertical Mill, 9” x 42” Table, Machine as is, No Lead Screw, S/N 12BR 43854
Supermill Mdl. J Vertical Mill, with 10” x 43” power feed table, 8-spindle speeds, 84-2760 RPM, S/N: N/A
14” X 48” Thompson Mdl. 4C Hydraulic Surface Grinder, with coolant, electromagnetic chuck, S/N: 4C-22106
6” x 18” Reid Mdl. 618V Mechanical Feed Surface Grinder, Permanent Magnetic Chuck, S/N: N/A
6” x 18” DoAll Mdl. G-1 Hydraulic Surface Grinder, with DoAll select, magna-lock chuck Electro Magnetic Chuck, S/N: G1-49622
6” x 12” DoAll Mdl. DH612 Hydraulic Surface Grinder, with electromagnetic chuck, S/N: 138-703302
5” x 10” Brown & Sharpe #510 Hand Feed Surface Grinder, S/N: 528-510-1029
5” x 10” Sanford Hand Feed Surface Grinder, Walker Permanent Magnetic Chuck,
10” x 16” DoAll Mdl. C-4 Horizontal Bandsaw, with 1” blade, automatic feed conveyor, S/N: 234-691482
16” DoAll Mdl. ML Vertical Bandsaw, with welder / grinder attachment, 0-1600 vari-speed, S/N: 4611305
 Doringer Mdl. D350 Coldsaws, with 14” diameter blade,1.6/3.3 HP, Miter cut, Vise, S/N’s 20632,
20” Stone Mdl. M75 Abrasive Cut-Off Saw, 7.5H, S/N 0492
DeWalt Radial Arm Saw
MATERIAL HANDLING & BRIDGE CRANES
Samuel P-200 Power Strapper
Rennco Mdl 201PP Heat Sealer / Bagger
Crown Mdl. BT-110-S 1500# Capacity Walk-Behind Lift Cart, S/N L-8339
Crown Mdl. B-74-S 1500# Capacity Walk-Behind Lift Cart, S/N L-3771
Large Quantity of Single Sided & Double Sided Cantilever Type Heavy Duty Adjustable Racking with 48” Arms & 40” x 94” Adjustable Pallet Racking
United Mdl. STM-26, S/N 996586
Darex Mdl. E85/90 1/4HP Drill Point Grinder, S/N 30392
Producto Screw Press, with 20” x 31” bed area
W.B. Knight #50 Jig Borer, with 40-2000 RPM, 15” x 52” Table, Power Downfeed, 17” Throat, S/N: 509102
28” Wysong & Miles Heavy Duty Floor Type Drill, with 18” x 24” t-slotted table, S/N: 595
28” Leland Gifford 4-spindle Gang Drill
22” Floor Type Drill Press
20” Walker Turner Floor Type Drill Press, S/N 2-644
19” Allen Floor Type Drill Press, with adjustable table, 1200 RPM, 14” x 20” Table, S/N: MSV-19256
Speedy-Cut Mdl. 2V2-2077 Bench Type Tapper, 210, 375, 650 RPM, S/N: 2-223
24” Bench Type Finger Brake
#4 Atlas Compound Mandrel Floor Type Arbor Press
6’ Whitney Jensen Hand Brake
8” Porter Cabel Mdl BG8 Wet/Dry Vertical Belt Sander, S/N 5078
Pique Hydraulic Cardboard Baler, Apprx 20” x 24”
6” Rockwell Mdl. 23-505 Double End Carbide Pedestal Grinder
Gardner Mdl 3CB Speed-U-Need Double End Polisher
8” Heavy Duty Edge Sander
6” x 6” DiAcro Hand Notcher
DiAcro #4 Hand Bender
Buyers Premium: 15% On-Site, 18% On-Line
Sales Tax: 8.875%
Posted Payment Due Date: Wednesday, May 9th, 2017
Posted Last Day of Removal: Friday, May 19th
Machinery Movers & Shippers
Pedowitz Machinery Movers (Ray) (917) 939-2975 - firstname.lastname@example.org
C.A.S. Rigging (Roland) (603) 941-4768 | (603) 491-2450 - email@example.com
Navis Pack & Ship (Gary) 203.335.7447
T E R M S O F S A L E
NOTICE: All Bidders and other persons attending this sale agree that they have read and have full knowledge of these terms and agree to be bound thereby.
Posted Payment Due Date: Wednesday, May 9th, 2017
Posted Last Day of Removal: Friday, May 19th
BUYER INFORMATION: Each potential Buyer represents, warrants and certifies that it has provided (i) its full and accurate legal name and business address, and the full and accurate legal name and address of Buyer’s representative(s) attending and/or participating in the sale event of the Property, and (ii) the citizenship status of Buyer and its representative(s) and any foreign interest of Buyer or its representative(s)
DEPOSIT: Koster Industries Inc. Reserves the right to require a deposit upon registration including credit card deposits and holds on the credit card for a minimum of $500.00 USD. All deposits are refundable.
PAYMENTS: All payments must be made in the form of Cash, Company Check – up to $1,000, Certified Funds over $1,000, Money Order, and Credit Cards with a 3% Processing charge. Koster Industries Inc. reserves the right to charge any buyers credit card for purchases made at the sale including all fees associated with if there is no communication between buyer and Koster Industries Inc. We will make multiple attempts to contact buyer then have the right to charge credit card associated with account.
Manor of payment are to be made out to Koster Industries Inc. Payments are due upon posted time of payment, any payments over the period of one week with no communication between buyer and auctioneer could be considered abandoned and Koster Industries Inc. Will reserve the right to re-sell any and all lots purchased.
Buyer Beware: “THE BUYER ALONE IS RESPONSIBLE FOR CHECKING THE QUALITY AND SUITABILITY OF GOODS BEFORE A PURCAHSE IS MADE”. Koster Industries Inc. makes no representations, warranties, promises, covenants or guarantees, expressed or implied, as to defects in or the completeness or accuracy of the description in any advertising of any item(s) being auctioned and is not responsible for any advertising discrepancies, descriptions, nomenclature or inaccuracies of any kind. ALL ITEMS ARE SOLD ON “AS IS, WHERE IS” BASIS AND WITH ALL FAULTS WITHOUT EXCEPTION AND WITH REMOVAL AT BUYERS SOLE RISK AND EXPENSE. THE AUCTIONEER MAKES NO REPRESENTATIONS, WARRANTIES, PROMISES, COVENANTS OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED, AS TO THE NATURE, QUALITY, DURABILITY, CAPABILITY, FUNCTION, PERFORMANCE, VALUE OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR) SUITABILITY FOR ANY USE. THE AUCTIONEER EXPRESSLY AND SPECIFICALLY DISCLAIM, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
REMOVAL: All purchases must be removed not later than Posted Removal Time. No lot can, on any account, be removed during the sale. Removal shall be at the expense, risk and liability of the purchaser. Purchases will be delivered only on presentation of paid bill. The Auctioneer shall not be responsible for goods not removed within the time allowed, but shall have the option to remove and store at the expense and risk of the purchaser any article purchased, but not paid for and removal of any of the goods. A storage charge of $750.00 USD will be applied to anyone who does not remove within the posted time limit without prior permission from our office. for insurance reasons Koster Industries Inc. does not supply any material handling devises or equipment including but not limited to forklift trucks, cranes, pallet jacks, hand trucks, Etc. We require valid insurance from all people who work inside the facility including all machinery movers, erectors, millwrights, or any buyer operating equipment or dismantling / moving machinery - NO EXCEMPTIONS.
Koster Industries Inc. does not pack, ship crate, transport or rig any items, we provide riggers / pack & ship companies information on our website as a courtesy, they are 3rd party contactors, Koster Industries is not responsible for rigging charges, damages, Etc. We must be supplied with an insurance certificate naming Koster Industries Inc. as additionally insured for all machinery movers or anyone operating equipment within the building - NO EXCEPTIONS
RESPONSIBILITY FOR NON-DELIVERY: The Auctioneer shall not, in any event, be liable for non-delivery of for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled thereto.
CLAIMS: No claims will be allowed after removal of goods from premises.
SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation.
INDEMNIFICATION: Purchaser agrees to indemnify and hold the Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom.
COMPLIANCE WITH LAWS. Buyer shall comply with all U.S. export control laws and regulations. The Property sold under the Transaction Documents may be subject to the provisions of Export Administration Act of 1979 and the Export Administration Regulations promulgated thereunder, the Arms Export Control Act and the International Traffic in Arms Regulations, and the sanctions laws administered by the Office of Foreign Assets Control. Buyer acknowledges that these statues and regulations impose restrictions on import, export and transfer to third countries of commodities and related data, and that licenses from the U.S. Department of Commerce or U.S. Department of State may be required before such commodities or data can be transferred, and that such licenses may impose further restrictions on use and further transfer of such commodities and data. Buyer agrees (i) to notify Seller prior to any transfer of Property (including goods, commodities or data) purchased under the Transaction Documents to any parties outside of the United States, (ii) to provide an end-use certificate and a certification that the Property (including goods, commodities and data) purchased under the Transaction Documents will not be transferred to any end-user or for any end-use that is prohibited by U. S. law, (iii) to provide proof of any required U. S. Automated Export System (AES) filing prior to export of any Property (including goods, commodities or data) purchased under the Transaction Documents, and (iv) that Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion, that any transaction arising out of the Transaction Documents does or may violate applicable U.S. export control or similar laws.
COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting purchaser. The execution, interpretation and performance of the Transaction Documents shall be governed by, and construed in accordance with,
the laws of the State of New York (without regard to its conflicts of law provisions). THE PARTIES HEREBY WAIVE THE RIGHT TO A JURY TRIAL IN ANY DISPUTE OF ANY CLAIM OR CAUSE OF ACTION BASED UPON OR ARISING OUT OF, DIRECTLY OR INDIRECTLY, THE TRANSACTION DOCUMENTS, ANY OF THE RELATED DOCUMENTS, ANY DEALINGS BETWEEN SELLER AND BUYER RELATING TO THE SUBJECT MATTER HEREOF OR THEREOF, AND/OR THE RELATIONSHIP THAT IS BEING ESTABLISHED BETWEEN SELLER AND BUYER.
RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer from liability therefore. Neither the Auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.
ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk.
SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: Where items are sold by estimated weight, count or measure, the purchaser will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any shortage exists, the purchaser will receive a refund at the rate of purchase. If there be an excess, the purchaser will be required to take and pay for such excess, at the rate of purchase.
DISPUTE BETWEEN BIDDERS: If any dispute arises between two or more bidders, the auctioneer may decide the same or put the lot up for sale again at once, and resell to the highest bidder. The auctioneer’s decision shall be final and absolute.
RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer shall have the right to bid on behalf of the Seller.
RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.
AGENCY: The auctioneer is acting as agent only and is not responsible for the acts of its principals.
SALES TAX: Purchaser shall also pay all applicable sales or use taxes imposed by all taxing authorities on such transaction unless purchaser shall present a resale certificate, certificate of exemption or the like, exempting the purchaser and auctioneer from the payment of any such sales and use taxes.
BANKRUPTCY: If at any time prior to payment in full, purchaser files a petition in bankruptcy or for other similar protection from creditors, or an involuntary petition in bankruptcy or other similar proceeding is filed against purchaser, then, at the option of the auctioneer, the sale may be voided.
ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
CREDIT CARD DEPOSITS: This auction will require a credit card deposit. Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $______ deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $______.
CREDIT CARD PAYMENTS: Payments via credit card are accepted up to $______ final invoice total. Any invoice total larger than $______ must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $______.