Koster Industries May Consignment Auction Sale | Koster Industries
INDUSTRIAL AUCTIONS FOR OVER 40 YEARS!
QUESTIONS? CONTACT US TODAY! 631.454.1766
COVID-19 Update: Koster Industries Remains Open for Business
Due to the COVID-19 - Please note the special terms and conditions regarding Inspection & Removal
Due to the COVID-19 - Please note the special terms and conditions regarding Inspection & Removal

Koster Industries May Consignment Auction Sale

Online Auction Sale Date & Time:

Online Sale Starts Closing At:

Thu, May 14th 2020 1:00 P.M. EST

Location:

Multi-Location

Inspection:

By Appointment Only

Auction Description

NOW ACCEPTING CONSIGNMENTS

CONTACT US TODAY +1.631.454.1766

CONSIGN YOUR ASSETS


  • No commissions or expenses charged to the seller
  • Promote your sale to tens of thousands of proven auction buyers
  • Seller can establish acceptable reserves
  • A proven method to promote your surplus from one machine to many machines in a major auction event at no cost to you!

Click Submit Listing or Consignment Submission Form to Consign Your Inventory 

Featuring:

40″ X 40″ MAXIMUM SECTION VOLUME, 40′ RANGE OF SECTION LENGTHS, 1′-1/4″ MAXIMUM DRILLING THICKNESS, 65 FPM POSITIONING SPEED, 1-1/4″ MAXIMUM DRILLING DIAMETER, 3/8″ TO 43-1/2″ POSITIONING STROKE, 90MM/MIN RANGE OF SPINDLE FEED RATE, 16 FPM SPINDLE POSITION SPEED, COMPLETE WITH GE FANUC 210IS|TB 2-AXIS CNC CONTROLS, 40′ TRAVEL, S/N: 28080, (2003)
HI-VAC MODEL 250 INDUSTRIAL VACUUM SYSTEM, 50-HP PORTABLE NN TRAILER, 2048 HOURS, S/N: HV-3898 (2001) (TESTED AND READY FOR USE) (ITEM UNDER POWER – N, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
DEMAG MDL. DR110 CRANE, 10 TON CAPACITY, 23″ APPROXIMATE LIFT, 2-SPEED LIFT, 66″ TROLLEY GAGE, [LOCATED IN LOUISVILLE, KY]
OSTER 502 BOLT AND PIPE THREADER PIPE DIES 1/4″ – 2″ BOLT DIES 3/8 THRU 2″ 2 DIE CHUCKS AND DEBURR TOOL, S/N: HU950 (1959) JUST REPLACE LOCKING JAWS. UPGRADED TO A BIGGER CAPACITY MACHINE. NOT USED FOR PRODUCTION WORK USED AT A JOB SHOP WELL MAINTAINED (LOCATED IN NEW JERSEY) – SELLER CAN LOAD, ITEM CAN BE INSPECTED
REID NO. 2-C 6″ X 18″ MANUAL FEED SURFACE GRINDER, 48″ X 48″ FOOTPRINT (LOCATED IN MASSACHUSETTS) (UNDER POWER – Y, CAN SELLER LOAD – Y, CAN BE INSPECTED – Y)
JACK MILL MACHINE TOOL MFG. CO., LTD MODEL GU-450M CYLINDRICAL GRINDER, SWIVEL TO TABLE 10, MAX WORK RANGE 10 /16 TN, WHEEL SIZE 14 X 1-1/2 X 5, SPINDLE SPEED 1520.1900 RPM, SWIVEL OVER TABLE 0 – 90, TAPER MT-4, MOUNTING STROCK TAPER MT-3 V 220/440, HZ 50 ELECTRICS (LOCATED IN OHIO) (IS ITEM UNDER POWER – Y, CAN ITEM BE LOADED – Y, CAN ITEM BE INSPECTED – Y)
JONES & LAMSON MODEL FC 30 30″ OPTICAL COMPARATOR, EXCELLENT CONDITION, S/N: 22158 (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
EVERETT MODEL 12 MIT COLD SAW, S/N: 1300 (LOCATED IN OHIO) (ITEM IS UNDER POWER – Y, ITEM CAN BE LOADED – Y, ITEM CAN BE INSPECTED)
ACME GRIDLEY, MODEL 2-5/8 RB 6 SCREW MACHINE, ACME GRIDLEY, MODEL 2-5/8 RB 6 SCREW MACHINE (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
ACME GRIDLEY MODEL 9/16 RA 6 SCREW MACHINE, EXCELLENT CONDITION (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
SAJO MODEL PF-54 HORIZONTAL MILLING MACHINE, S/N: 721936 (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
G&E MODEL 36H GEAR HOBBER (VERY GOOD CONDITION) (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
ACME GRIDLEY MODEL 1″ RA 6 SCREW MACHINE, S/N: 124 (EXCELLENT CONDITION) (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
KALAMAZOO MODEL H9AWV HORIZONTAL BANDSAW, S/N: 17916 (VERY GOOD CONDITION) (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
MOTOMAN MODEL MH-1600 WELDING CELL 2 HEADS 2 POSITIONERS COMPLETELY GONE THRUE REBUILT WITH ALL NEW PARTS, HEADS, FEEDERS, SERVOS ECT… BY ROBOTWORKS SPARED NO EXPENSES TO GET THEM WORKING FOR A JOB THEN NEVER USED. S/N: 000513, (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
CLEARING MODEL 110 P 701 OBI PRESS 110 TON PRESS, S/N: 54-3217 RUNS GREAT (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
MILLER MODEL MPS-20 SPOT WELDER, 20-KVA, WITH BASE, S/N: JD669637 NEW CONDITION MILLER MODEL MPS-20 SPOT WELDER
JOHNFORD MODEL SL-500A 6 AXIS CNC LATHE WITH SUB-SPINDLE, LIVE TOOLING, 12′ BAR FEEDER, COLLETS & CHUCKS, LOTS OF NEW TOOLING, COST WAS OVER $300,000.00 NEW, 200 HRS OF USE, S/N: TEN186199 (2019) WE LOST CONTRACT IT IS LESS THAN A YEAR OLD (LOCATED IN OHIO) (ITEM UNDER POWER – Y, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
SILENT HOIST MODEL FKS20 40,000# RIGGERS SPECIAL FORKLIFT, 56″ REACH CAN BE MODIFIED TO 61″, FREE LIFT 43″, MAST HEIGHT 128″, DOWN 141″, ALL THE WAY UP, STAND UP, PROPANE, CUSHION TIRES, NO SIDE SHIFT OR TILT, 60″ FORKS GREAT FOR LIFTING HEAVY MACHINERY OR STEEL COIL, S/N: 19548 (1976) (LOCATED IN BROOKLYN, NY)  (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
EZ SANDER MODEL EZ3760M460-3 BELT SANDER 37″ WIDE CAPACITY, 10″ MINIMUM PART LENGTH, 37″ X 60″ BELT SIZE, 5-25 FPM FEED SPPED, 0-5″ MACHINE OPENING, 15-HP MOTOR, 460V, 3PH ELECTRICS, HEAVY-DUTY CASTERS, ELECTRONIC ABRASIVE BELT TRACKING SYSTEM, ABRASIVE BELT LOADING DOOR WITH SAFETY INTERLOCK, MOTORIZED LIFT WITH DIGITAL THICKNESS READOUT FOR CONVEYOR BED SETTINGS, MOTOR LOAD METER, HOUR METER, OVER-THICK SHUT-OFF SYSTEM ON INFEED, AIR CALIPER DISC BRAKE, SAFETY MICRO SWITCHES, S/N: 190454 (LOCATED IN CLOSTER, NJ) (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
METAL PRO 4000 40-TON CAPACITY IRON WORKER, 3-3/4″ THROAT DEPTH, 2″ DIE HOLDER, PUNCHG RETAINING NUT & STRIPPER, POWER CAVITY INCLUDES 3 IN 1 SHEAR, SHEARING CAPACITIES: FLAT : 3/8″ X 4″ AND 1/4″ X 6″, ANGLE: 1/4″ X 3″ X 3″, ROD: ROUND-3/4″, SQUARE- 5/8″, NOTCHING: 1/4″X1-3/4″X2″, PIPE NOTCHERS: SCHEDULE 40: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 20-TON CAPACITY 8″ BRAKE, 2500 PSI HYDRAULICS (LOCATED IN COLSTER, NJ) (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
3-1/2” PROFESSIONAL CORE DRILL RIG, 3-1/2” (90MM) MAXIMUM DRILLING DIAMETER, 1-1/4” – 7 MOTOR SPINDLE, 19” (480MM) DRILL TRAVEL, TWO SPEEDS, 950RPM AND 210RPM, PRECISION RACK AND PINION GEAR SYSTEM, POWERFUL 1500W MOTOR DELIVERS EXTRA DRILLING TORQUE, WATER HOSE CONNECTION FOR WET DRILLING, 120V/60HZ/1PH ELECTRICS
BLACK & DECKER DEWALT RADIAL ARM SAW (LOCATED IN CLOSTER, NJ) (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
MARVEL MARK 8 VERTICAL TRAVELING BANDSAW, 90 DEGREE CAPACITY 18″ X 22″, 45 DEGREE RIGHT 18″ X 14.5″, 45 DEGREE LEFT 18″ X 13″, 60 DEGREE RIGHT 18″ X 9.7″, 60 DEGREE LEFT 18″ X 7.3″, 50-450 FPM SPEED RANGE, 0-250 LBS INFINITELY VARIABLE FEED RANGE, COMPLETE WITH FRONT MOUNTED SPEED CONTROL, T-SLOTTER WORK TABLE, 24.25″ X 33″, 38″ TABLE HEIGHT; (2) MACHINE T-SLOTS, 19″ CAST IRON WHEEL DIAMETER, BLADE BREAK / STALL DETECTION, MITER CUTTING, COLUMN AND BLADE TILT UP TO 60 DEGREES RIGHT AND LEFT OF VERTICAL, MANUAL TILT STANDARD WITH SURE-LOCK AND BUILT-IN PROTRACTOR, 18″ QUICK ACTION VISE, ADJUSTABLE AUTOMATIC STOPS, BUILT IN FLOOD COOLANT SYSTEM, FLUSHING HOSE, POWER CHIP BRUSH, CARBIDE GUIDE SYSTEM, 15;4″ LONG X 1.25″ WIDE X .42″ THICK BLADE, 5-HP MOTOR, 1800 RPM (LOCATED IN CLOSTER, NJ) (LOCATED IN GREENSBORO, NC) (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
GEKA MODEL HYDRACROP 100SD – DEEP THROAT 110-TON HYDRAULIC IRONWORKER, 1-1/4” ROUND THROUGH 1” MILD PUNCHING CAPACITY, 24” THROAT DEPTH, 6” x 6” x ½” ANGLE SHEAR CAPACITY, 24” LENGTH x 5/8” AND 12” x 1” FLAT SHEAR CAPACITY, 2” SOLID ROUND / SQUARE SHEAR BLADES, COMPLETE WITH OVERSIDE PUNCH ATTACHMENT, S/N: 13159 (1986) (LOCATED IN RONKONKOMA, NY) (ITEM UNDER POWER – y, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
GATTI MODEL S2550/3 14 ga X 8’ MECHANICAL POWER SHEAR, 8’, 14GA. MILD STEEL CAPACITY, 7-7/8” THROAT GAP, 50-SPM SPEED, 4-HP, 230-VOLT, 3PH ELECTRICS, COMPLETE WITH FRONT MANUAL BACK GAUGE WITH LINEAR SCALE, (3) FRONT SUPPORT ARMS (LOCATED IN RONKONKOMA, NY) (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
NATIONAL SHEET METAL MODEL N7212 HAND BRAKE12ga x 6’, 73” BENDING LENGTH, 12 GA. MILD STEEL CAPACITY (LOCATED IN RONKONKOMA, NY) (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
DOALL MODEL 16-2 16” VERTICAL BANDSAW, 16” THROAT DEPTH, 10” MAXIMUM WORK HEIGHT, 120” SAW BAND LENGTH, VARI-SPEED 50-400 RPM LOW RANGE, 200-1600 RPM HIGH RANGE, 24” X 24” WORKTABLE, TILTS 45 DEGREE RIIGHT, 10 DEGREE LEFT (LOCATED IN RONKONKOMA, NY) (ITEM UNDER POWER – N, ITEM BE LOADED – N, ITEM BE INSPECTED – Y)
LOCKFORMER TRIPLEX MODEL 14 ADJUSTABLE BAR CLEAT MACHINE, INBOARD STATION CURRENTLY SET UP FOR 1-1/8″ BAR CLEAT, 20GA, OUTBOARD STATION CURRENTLY SET UP FOR: SET OF 1/2″ PITTSBURGH ROLLS, 16GA, 8″ GEAR SIDE, 7″ PLAIN SIDE ROLL SPACE, 1-18″ SHAFT DIAMETER, 3-3/8″ SHAFT EXTENSION, 6″ HORIZONTAL CENTERS, 3-1/2″ VERTICAL CENTERS, 70 FPM APPROX. FORMING SPEED (LOCATED IN RONKONKOMA, NY) (IS ITEM UNDER POWER – Y, CAN ITEM BE LOADED – N, CAN ITEM BE INSPECTED – Y)
SEBASTIAN LATHE CO. 13″ X 36″ SHELDON TYPE LATHE, 220V / 3PH / 60HZ, 1HP MOTOR, 1725 RPM, 13′ SWING OVER BEDWAYS, 36″ BETWEEN CENTERS, 72″ X 24″ X 53″ HIGH OVERALL DIMENSIONS, 4-JAW CHUCK, TOOL POST RING / ROCKER, FORWARD / REVERSE ON / OFF SWITCH [9440-440] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
CLAUSING MDL. 6918 14″ X 48″ PRECISION LATHE, FLAME HARDENED WAYS, 220V/ 3PH / 60HZ, 14-1/8″ SWING OVER BED & SADDLE WINGS, 8-3/8″ SWING OVER CROSS SLIDE, 1-3/8″ HOLE THRU SPINDLE, 48″ BETWEEN CENTERS, 45-1650 RPM, VARIABLE SPEED, L-00 SPINDLE NOSE, #3MT SPINDLE CENTER, #3MT TAILSTOCK CENTER, 3HP MOTOR, 2500# EST. WEIGHT, 89″ X 32″ X 54″ HIGH OVERALL DIMENSIONS, 12″ 3-JAW CHUCK, 8″ 4-JAW CHUCK, TRAV-A-DIAL / THREADING DIAL, CABINET STAND, DRUM TYPE REVERSING SWITCH, S/N: 601416 [0447-440] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
SOUTHBEND 25″ X 78″ PRECISION METAL CUTTING LATHE, 220V / 3PH / 60HZ, 25-1/4″ SWING OVER BED, 18-1/4″ SWING OVER CROSS SLIDE, 78″ BETWEEN CENTERS, #3MT TAILSTOCK CENTER, 1-3/8″ HEAD STOCK THRU SPINDLE HOLE, 1-1/16″ MAX COLLET CAPACITY, 3HP MOTOR, 126.5″ X 41″ X 54″ HIGH OVERALL DIMENSIONS, TAPER ATTACHMENT, 3-JAW CHUCK, STEADY REST, 22-3/4″ FACE PLATE, LIVE CENTER IN TAILSTOCK, TOOL POST RING / ROCKER, S/N: 5553HKE10 (1955) [CAT #CL198] [2422-440] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
WEBB MDL. 17CX40 “HWACHEON” 17″ / 25-9/16″ X 40″ INCH / METRIC GEARED HEAD ENGINE GAP LATHE, 220-440V / 3PH / 60HZ, 5HP, 17-1/8″ SWING OVER BED, 8-7/16″ BED TO CENTER, 40″ BETWEEN CENTERS, 9-3/4″ SWING OVER CROSS SLIDE, 25-9/16″ SWING OVER GAP, 32-1800 RPM, A1-6 SPINDLE NOSE, 2-3/64″ SPINDLE BORE, MT #6 TAPER OF SPINDLE, 6″ TAILSTOCK TRAVEL, MT #4 TAPER OF CENTER, 13-3/4″ WIDTH OF BED FACE, 94″ X 38″ X 50″ HIGH OVERALL DIMENSIONS, 5600# EST. WEIGHT, 12″ 3-JAW CHUCK, FOOT BRAKE, COOLANT SYSTEM, S/N: 7904-29 [6810-440] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
FEELER MDL. FTS-27 SECONDARY OPERATION LATHE, 220V / 3PH / 60HZ, 230-3500 RPM, 36″ LENGTH OF BED, 9″ SWING OVER BED, 3-3/4″ TRAVEL OF DOUBLE TOOL CROSS SLIDE, 4″ TRAVEL OF TURRET SLIDE, 5/8″ DIAMETER OF TURRET HOLES, 3-GAL. COOLANT SUMP CAPACITY, 74″ X 35″ X 68″ HIGH APPROXIMATE DIMENSIONS, 1000# EST. WEIGHT, LEVER 5C COLLET CLOSER WITH PNEUMATIC ASSIST, 6-STATION TURRET WITH PNEUMATIC ASSIST, CABINET STAND [6844-440] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
ALZMETAL MDL. AB3/R 3′ X 9″ RADIAL DRILL, 220-440V / 3PH / 60HZ, 1-1/4″ CAPACITY, 36″ ARM, 9″ COLUMN DIAMETER, 120-1460 RPM, 6″ STROKE, #3 SPINDLE TAPER, 27-1/2″ THROAT, 2HP MOTOR, 25″ X 59″ X 90″ HIGH OVERALL DIMENSIONS, 3550# EST. WEIGHT, POWER ELEVATION, BOX TABLE, S/N: 12-1465 [7307-410] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
MILWAUKEE MDL. 4297-1/4220 MAGNETIC DRILL PRESS, 115V / 1PH / 60HZ, 1-1/4″ DRILLING CAPACITY, #3 MT SPINDLE, 4-1/4″ DRILL WIDTH, 11″ DRILL LENGTH, 9″ DRILL TRAVEL, 85# EST. WEIGHT, JACOBS 1/2″ DRILL CHUCK WITH KEY, S/N: 296-3384 [1423-410] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
WESTHOFF MDL. 100-1 HORIZONTAL DRILLING MACHINE / FLUSH DRILL, 110V / 1PH / 60HZ, 4-1/2″ VERTICAL HEAD TRAVEL, 12″ HORIZONTAL TRAVEL, 8-1/2″ X 8-1/2″ WORK TABLE, 8-1/2″ WORK TABLE TRAVEL, 30# WORK TABLE LOAD, 10HP MOTOR, LINEAR BALL BUSHINGS, 26″ X 24″ X 18″ HIGH OVERALL DIMENSIONS, 50# EST. WEIGHT [3194-410] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
DAREX MDL. SP2500 SUPER PRECISION DRILL BIT SHARPENER / GRINDER, 115V / 1PH / 60HZ, 1/16″ – 1″ DRILL GRINDING RANGE, 1/4HP MOTOR, 3450 RPM MAX SPEED, 6.45″ MAX WHEEL DIAMETER, 18″ X 18″ X 50″ OVERALL DIMENSIONS, FACTORY STAND, OPERATING MANUAL, EXTRA SHARPENING WHEEL, [3] DRILL CHUCKS [2491-430] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
AIRTEK MDL. SC-250 REFRIGERATED AIR DRYER FOR AIR COMPRESSOR, 230V / 1PH / 60HZ, 250-SCFM, 200-PSI MAX, 50″ X 28″ X 56″ OVERALL DIMENSIONS, 350# APPROXIMATE WEIGHT, DEW POINT SMART CYCLE DUAL MODE DIGITAL / ANALOG CONTROL, S/N: 97-4635H [2963-540] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
ARROW PNEUMATICS MDL. A10 AIR DRYER, 115V / 1PH / 60HZ, 1/6HP, 10-SCFM, FULLY AUTOMATIC, PANEL MOUNTED GAUGES, RELIABLE PNEUMATIC VALVE OPERATION, SOLID STATE CONTROLS, POWER-ON LIGHTED SWITCH, S/N: LE390 [3395-540] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
KENT USA MDL. TW-32-MV CNC BED MILL, FANUC 3-AXIS O-MD CONTROL, 220V / 3PH / 60HZ, 30-AMP SERVICE, 10HP SPINDLE MOTOR, CAT 40 SPINDLE TAPER, 12″ X 50″ TABLE, X-AXIS 34″, Y-AXIS 20″, Z-AXIS 20″, DOVETAIL WAYS ON Z-AXIS, 20″ SPINDLE CENTER TO COLUMN, 4″-24″ SPINDLE TO TAPER, 5.5″ QUILL TRAVEL, 4.173″ QUILL DIAMETER, 72″ X 86″ X 88″ OVERALL DIMENSIONS, 4100# EST. WEIGHT, PROGRAMMABLE .25HP FLOOD COOLANT SYSTEM, AUTO LUBE SYSTEM, HALOGEN WORK LIGHT, TABLE COOLANT GUARD [2943-500] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
HANSVEDT MDL. SM-150B EDM, 115V / 1PH / 60HZ, 30-AMPS, 6″ RAM TRAVEL, 9″ X 5″ RAM PLATEN, 24″ X 18″ X 11″ TANK SIZE, 8″ LEFT TO RIGHT TABLE TRAVEL, 6″ FRONT TO BACK TABLE TRAVEL, 16″ RAM PLATEN TO TABLE, 10″ THROAT, 60″ X 32″ X 82″ OVERALL DIMENSIONS, 1350# EST. WEIGHT, 5″ X 7″ PERMANENT MAGNETIC CHUCK, OIL RESERVOIR TANK, BENCH, HYDRAULIC PUMP, MANUAL, DIELECTRIC COOLANT & FILTRATION SYSTEM, 150B POWER SUPPLY [1319-505] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
CHEVALIER MDL. FSG-2A618 6″ X 18″ HYDRAULIC TABLE SURFACE GRINDER, 220-440V / 3PH / 60HZ, 5-3/4″ X 18″ WORKING SURFACE, 19″ X 6-3/4″ TABLE TRAVEL, 18″ MAX DISTANCE SPINDLE SURFACE TO TABLE, 1HP SPINDLE MOTOR, HYDRAULIC PUMP MOTOR, 52″ X 44″ X 76″ HIGH OVERALL DIMENSIONS, 1695# EST. WEIGHT, 6″ X 18″ FINE POLE PERMANENT MAGNETIC CHUCK, MACHINE LIGHT, CAST IRON MACHINE BASE, OPERATING MANUAL / PARTS SCHEMATICS, SEPARATE HYDRAULIC / COOLANT SYSTEM, AUTO LUBE SYSTEM, SPLASH GUARDS (1987) [1357-420] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
BROWN & SHARPE MDL. 510 HAND OPERATED MICROMASTER SURFACE GRINDER, 208V / 3PH / 60HZ, 11″ LONGITUDINAL TRAVEL, 5″ CROSS TABLE TRAVEL, 15-1/2″ HEIGHT UNDER WHEEL, 7″ WHEEL SIZE, 5″ X 10″ MAGNETIC CHUCK, LEVER OPERATED TABLE FEED, S/N: 523-510-2166 [6999-420] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
CHEVALIER MDL. FSG-612 6″ X 12″ HAND OPERATED SURFACE GRINDER, 220-440V / 3PH / 60HZ, 5-3/4″ X 12″ WORKING SURFACE, 13″ X 6-3/4″ TABLE TRAVEL, 18″ MAX DISTANCE TABLE TO SPINDLE, 12″ MAX GRINDING LENGTH, 6″ MAX GRINDING WIDTH, 1HP SPINDLE & MOTOR, 52″ X 38″ X 62″ OVERALL DIMENSIONS, 750# EST. WEIGHT, 6″ X 12″ FALCON STANDARD POLARITY PERMANENT MAGNETIC CHUCK, ONE SHOT LUBE SYSTEM, S/N: 01-01201 [0432-420] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
FREEPORT MDL. SGS618 6″ X 18″ HAND OPERATED SURFACE GRINDER, 220-440V / 3PH / 60HZ, 6″ X 18″ MAX GRINDING SURFACE, 5.9″ X 18″ WORKING SURFACE, 18.9″ MAX HORIZONTAL TABLE TRAVEL, 6.4″ MAX CROSS TABLE TRAVEL, 18.1″ BETWEEN TABLE & SPINDLE CENTER, 1HP SPINDLE MOTOR, 3500 RPM SPINDLE SPEED, 1540# EST. NET WEIGHT, 5″ X 10″ BROWN & SHARPE STANDARD POLARITY MAGNETIC CHUCK, ONE SHOT LUBE SYSTEM, S/N: 8302135 (1983) [8343-420] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
P. PRYIBIL MACHINE CO. MDL. L18-2 SPINNING LATHE, 220-440V / 3PH / 60 CYCLE, 18″ SWING, 26″ CENTER DISTANCE, 71″ X 29″ X 56″ OVERALL DIMENSIONS, 1600# EST. WEIGHT, SPEED CONTROL, TAILSTOCK [8890-440] [MISSING HAND WHEEL ASSEMBLY] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
HURCO MDL. SM1 3HP VERTICAL MILLING MACHINE, 220V / 3PH / 60HZ, 9″ X 42″ TABLE, X-AXIS 24″, Y-15″, Z-5″, 23″ RAM TRAVEL, 16.5″ KNEE TRAVEL, 60-4000 RPM, 3HP SPINDLE MOTOR, R-8 SPINDLE TAPER, 2750# CAPACITY, 76″ X 69″ X 77.5″ HIGH OVERALL DIMENSIONS, ONE SHOT LUBE, SERVO POWER FEED TABLE, HARDENED WAYS [9188-470] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
LAGUN MDL. FT1 RAM TYPE VERTICAL TURRET MILLING MACHINE, 220-440V / 3PH / 60HZ, 2HP MOTOR, 10″ X 44″ WORKING SURFACE, 30″ X 16″ TABLE FEED, 16″ VERTICAL KNEE TRAVEL, 5″ QUILL TRAVEL, 22-3/16″ RAM TRAVEL, R-8 SPINDLE TAPER, 3/4″ MAX COLLET CAPACITY, 76″ X 63″ X 82″ HIGH OVERALL DIMENSIONS, 2200# EST. WEIGHT, POWER LONGITUDINAL TABLE FEED, POWER CROSS TABLE FEED, TRAK 2-AXIS DIGITAL READOUT, MANUAL, S/N: SE-21654 [7508-470] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
RAMILL MDL. XLT 3HP VERTICAL MILLING MACHINE, 220V / 3PH, 10″ X 50″ TABLE, DIGITAL READOUT, MANUAL, POWER FEED TABLE, PN EUMATIC COLLET CLOSER, S/N: NX01091010 (1989) [6799-470] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
BARKER BENCH MODEL HORIZONTAL PRODUCTION MILL, 115V / 1PH / 60HZ, 4″ X 12″ X 1/2″ WORKING SURFACE, 5″ LONGITUDINAL TRAVEL, 3″ HEAD VERTICAL TRAVEL, 3″ SADDLE CROSS TRAVEL, 22″ X 24″ X 18-1/2″ OVERALL DIMENSIONS, 175# CAPACITY, 3C COLLET TAPER SPINDLE NOSE, 1/2″ SPINDLE CAPACITY, 1/3HP MOTOR, LAMP ATTACHMENT [9044-460] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
BARKER BENCH MODEL HORIZONTAL PRODUCTION MILL – COMPLETE SETUP, 115V / 1PH / 60HZ, 4″ X 12″ X 1/2″ WORKING SURFACE, 5″ LONGITUDINAL TRAVEL, 3″ HEAD VERTICAL TRAVEL, 3″ SADDLE CROSS TRAVEL, 50″ X 28″ X 58″ OVERALL DIMENSIONS, 275# CAPACITY, 3C COLLET TAPER SPINDLE NOSE, 1/2″ SPINDLE CAPACITY, 1/3HP MOTOR, LAMP ATTACHMENT, OVERBEAM OUTBOUND SUPPORT, ROLL AROUND BASE [9037-460] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
BARKER MDL. PM HORIZONTAL PRODUCTION MILL, 115V / 1PH / 60HZ, 4″ X 12″ X 1/2″ WORKING SURFACE, 5″ LONGITUDINAL TRAVEL, 3″ HEAD VERTICAL TRAVEL, 3″ SADDLE CROSS TRAVEL, 22″ X 24″ X 18-1/2″ OVERALL DIMENSIONS, 175# CAPACITY, 3C COLLET NOSE TAPER SPINDLE NOSE, 1/2″ SPINDLE CAPACITY [9046-460] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
BARKER MDL. PM HORIZONTAL PRODUCTION MILLING MACHINE, 110V / 1PH / 60HZ, 24″ X 22-1/4″ X 18-1/2″ OVERALL DIMENSIONS, 4″ X 12″ X 1/2″ WORKING SURFACE, 5″ LONGITUDINAL TRAVEL, 3″ HEAD VERTICAL TRAVEL, 3″ SADDLE CROSS TRAVEL, V-BELT DRIVE, #3-C STANDARD COLLET TAPER SPINDLE NOSE, 5C COLLET HANDING FIXTURE, PNEUMATIC TABLE FEED, PNEUMATIC VERTICAL FEED, MANUAL CROSS FEED, CABINET, STAND [6841-460] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
BRIDGEPORT MDL. BR2J 1-1/2HP VARIABLE SPEED VERTICAL TURRET MILLING MACHINE, 230V / 3PH / 60HZ, 9″ X 42″ TABLE, 30″ LONGITUDINAL TRAVEL, 12″ CROSS TRAVEL, 16″ VERTICAL KNEE TRAVEL, 0-18″ VERTICAL CAPACITY, R8 TAPER, 5″ QUILL TRAVEL, 60-4200 RPM, 76″ X 63″ X 77.5″ OVERALL DIMENSIONS, 2130# EST. WEIGHT, BRIDGEPORT POWER FEED TO TABLE, S/N: 12BR137495 (1970) [0342-470] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
SUNNEN MDL. MBB-1650 PRECISION HONING MACHINE, 110V / 1PH, 3/4HP MOTOR, 16″ STROKE, 32″ X 40″ X 64″ OVERALL SIZE, 850# CAPACITY, TOOLING, S/N: 44975 [6816-700] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
SUNNEN MDL. MBB-1650 PRECISION HONING MACHINE, PF150 FILTER, 220-440V / 3PH, 200-1600 RPM SPINDLE SPEEDS, 1/2HP SPINDLE MOTOR, 16-GA. HONING OIL CAPACITY, 1000# APPROXIMATE WEIGHT, S/N: 51900 [7440-700] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
PETER WOLTERS MDL. 3R380 SINGLE WHEEL TYPE LAPPING MACHINE, 120V / 1PH / 60HZ, 15″ WHEEL DIAMETER, 0-80 RPM VARIABLE SPEED, 24″ X 32″ X 20″ OVERALL DIMENSIONS, 308# EST. WEIGHT, S/N: 275 (1998) [2648-340] [MACHINES CAN BE LOADED ON PROPER TRUCK FOR $100 / CRATING, SKIDDING, PALLETIZING, SHIPPING NOT INCLUDED, BUT AVAILABLE, PLEASE INQUIRE] [LOCATED IN PROVIDENCE, RI]
KOMO MODEL VR1205TT MACH2S CNC ROUTER, WITH (2) 72” x 60” MOVING TABLES THAT CAN OPERATE INDEPENDENTLY FOR UNLOAD / LOAD ONE, WHILE THE OTHER IS IN PROCESS OR TOGETHER AS A 12’ x 5’ WORK ENVELOPE, VACUUM TABLES ARE MACHINED 2” SOLID ALUMINUM, COMPLETE WITH (2) 16-HP HSK 63F TYPE ROUTING SPINDLES, AUTOMATIC TOOL CHANGER, FANUC CONTROL SYSTEM, Z-AXIS TRAVEL 25.4”, S/N: 56853-06 (2006) (MACHINE IS IN OPERATION PRIOR TO DISCONNECT) (LOCATED IN HAINSPORT, NJ) (ITEM UNDER POWER – N, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
THERMWOOD MODEL CS40 3-AXIS CNC ROUTER, 48” x 96” VACUUM TABLE HOLDS MATERIAL IN PLACE, COMPLETE WITH SOME BITS AND (7) COLLETS INCLUDED (NEW 2003) (LOCATED IN HUNTINGTON BEACH, CA) (ITEM UNDER POWER – N, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
COMET STAR 4’ x 8’ SINGLE STATION THERMOFORMER, 48’ x 48” FORMING AREA, TOP AND BOTTOM PLATENS (ELECTRIC), TOP AND BOTTOM CALROD HEAT, AUTOMATIC CYCLE (LOCATED IN CHIPPEWA FALLS, WI) (ITEM UNDER POWER – N, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
ALLOYED MODEL 2SM1428 SINGLE SHUTTLE BLASTER SEALER, 14” x 28” SEALING AREA, AUTOMATIC CYCLE, SINGLE SHUTTLE, S/N: 99019 (1999) (REMOVED FROM A FORTUNE 500 COMPANY) (LOCATED IN SANDWICH, MA) (ITEM UNDER POWER – N, ITEM BE LOADED – Y, ITEM BE INSPECTED – Y)
CM FURNACES, INC MODEL 344-36-3Z HYDROGEN FURNACE, 480V 40 AMP 3 PHASE, 120V 15 AMP, OPERATES UP TO 1700C, ACCEPTS MATERIAL: 3.5 X 24 X 1, SIZE AND WEIGHT: 135 X 50 X 72 INCHES, 6,000LBS, S/N 0200029 (LIKE NEW CONDITION) (LOCATED IN ENFIELD, CT) (NEW COST $130,000)
TM MODEL: SS813CT 06082 III VACUUM FURNACE, 460V 60 AMP, 3 PHASE, 115V 60 CYCLES, HI VAC DIFFUSION PUMP, COOLING FAN. AIR REQUIREMENT: 80-125 PSI (TO OPERATE SOLENOID VALVE), OPERATES UP TO 2,400F, ACCEPTS MATERIAL 8 X 8 X 14 INCHES AND 75LBS MAXIMUM, SIZE AND WEIGHT: 72 X 48 X 72, 4,200LBS. , S/N 1H1472-11397 (EXCELLENT CONDITION) , (LOCATED IN ENFIELD, CT) (NEW PRICE $130,000)
(12)KENNEDY KS-RW 250 # & 200# 6″ RESILIENT WEDGE GATE VALVES, DUCTILE IRON, 888H (LOCATED IN MAUMELLE, AR)
(8)CHESTER ZEPHYR 1/2 TON, 10’ LIFT MANUAL CHAIN HOISTS (LOCTED IN MAUMELLE, AR)
(5)COLUMBUS MCKINNON (CM) CYCLONE 10 TON CHAIN HOISTS, 10′, DOM 2018 (LOCTED IN MAUMELLE, AR)