Location: 60 Corbin Ave, Suite F Bay Shore (Long Island), New York 11706
Online Sale Starts Closing At:
Inspection: Monday, 29th From 8AM – 4PM

View PDF Brochure Enter Online Auction


Manford Mdl. VH1000 Vertical Machining Center, with 47.2” x 19.2” table, 1100# table load capacity, travels: x-39.4”, y-20”, z-22”, #40 taper spindle, 8000 RPM spindle, 5.5 / 7.5kw spindle motor, 21-position automatic tool changer, Fanuc Oi-MC control, 590 / 590 / 472 IPM / min. rapid feed rate, S/N: 06058 (2006)

Leadwell Mdl. MCV-1300ER 4-Axis Vertical Machining Center, with #50 taper spindle, 27.25” x 66.50” table, chip conveyor, 30-position automatic tool changer, Fanuc O-M control, S/N: L1S1H0198, 6” Troyke Mdl. DL-6-B 4th Axis Rotary Table, S/N: 5155-5

Bridgeport Mdl. VMC760-22 Vertical Machining Center, with 19.25” x 39.25” table, BT-40 taper, 22-position automatic tool changer, Bridgeport DX-32 control, S/N: 760-031


9” Troyke Mdl. NC-9-B 4th Axis Rotary Table, S/N:  4349-1

6” Troyke Mdl. DL-6-B 4th Axis Rotary Table, S/N: 5155-5


Johnford Mdl. TC-20 CNC Lathe, with 16.54” swing over bed, 11.81” swing over cross slide, 20.47” distance between centers, 2.6” spindle bore, A2-6 spindle nose, 25-4000 RPM, 12-position turret, 15.75” z-axis, chip conveyor, 8” 3-jaw chuck, tailstock, Fanuc O-T control, S/N: T17189 (1997), complete with CNC Enhancements Autobar 400 Magazine Type Bar Feed, pendant, S/N: 121 (1997)

Ikegai Mdl. AX15Z CNC Lathe, with 8” diameter 3-jaw chuck, 12-position turret, tailstock, Fanuc control,

LATHES – 2nd Operation & Speed Types

Feeler Mdl. FSL-27 High Speed Lathe, with draw bar, production cross slide, 5C collet capacity, 8-1/2” swing over way, 1/2HP, S/N: 10225

MSC Mdl. LHT-25B 2nd Operation Turret Lathe, 2HP, with draw bar, 6-1/2” swing over cross slide, [4] spindle speeds, 460-1850 RPM, coolant, S/N: 258187 (1989)


Bridgeport / Supermax 1HP Vertical Mill, with Mitutoyo digital readout, [8] spindle speeds, 80-2720 RPM, R8 collet, 9” x 49” power feed table, S/N: 911941


20” Rockwell Mdl. 28-3X5 Vertical Bandsaw, vari-speed, with 50-4500 FPM, with 24-1/4” x 24-1/4” tilting table, S/N: 181436

8” x 16” Kalamazoo Horizontal Bandsaw, with manual clamp, 1” blade


10HP Vertical Piston Type Tank Mounted Air Compressor

Quincy Twin 2HP Horizontal Tank Mounted Air Compressor, [2] piston type compressors with 2HP motors

5HP (approximately) Devilbiss Piston Type Horizontal Tank Mounted Air Compressor

Dayton Mdl. 3Z531 1/3HP Air Dryer, with 35 SCFM @ 100 psig, S/N: 0316A-31-8612-161N


5” x 10” Unitek Handfeed Surface Grinder, direct drive spindle, Walker 5” x 10” permanently magnetic chuck

14” Clausing 4-spindle Gang Drill, with #1655 step pulley head, #1639 step pully with 260-5400 RPM, (2) #1685 variable speed heads, 330-4000 RPM, 20” x 60” table

15” Walker Turner Floor Type Drill Press, 1/2HP, single phase

10” Kira KRT-10 Bench-Type Drill Press, 4 spindle speeds, 480-1050 RPM, S/N: AU1507

Vibratory Finisher, 20” long x 11” wide x 6” inside dimensions, rubber lined

Cyclone 2-hand Reach-in Dry Blast Cabinet, 26” x 22” x 21” deep approx. inside dimensions

Air Rover XL24 Portable Air Condition Unit, 27,400 BTUH, S/N: 23280501

Greenerd Bench-type Arbor Press

6” Belt & 12” Disc Combination Sander, 3-phase, tilting table

1/3HP US Electrical Tool Double End Pedestal Grinder, 6” diameter wheels, single phase

Airco Mdl. 2.25ADT-2-A Welder, 200 amps, 30 volts, S/N: 1353-0141


6” & 8” Kurt Vises, Right Angle Plate, Taps, Drill Bits, Stamp Sets, Milling & Bench Vises, Drill Cabinets, Tapping Heads, #40 & #50 Taper Tooling, Anglok Vises, Hout Tool Carts, 5C Collets, R8 Collets, Indexers, Rolling Carts, Work Benches, Plus Much More


Mitutoyo 18” Digital Height Gage, Assorted Height Gages, Micrometer Sets, Pin Gauge Sets, Dial Gauge, Mitutoyo Height Master, Verniers up to 50”, plus gages, Jo-Blocks, Calipers, 48” x 36” x 6” Granite Surface Plate, Etc

14” Scherr Tumico Optical Comparator, 6” x 16” Work Table


Not Available
Not Available
Not Available

Place a Proxy Bid

If you are unable to attend an auction, Koster Industries can bid on your behalf

Join Our Mailing List